Region Status issues in paraFoam

oldschool · January 28, 2010, 16:54

Hello,

have just installed OpenFoam without any troubles and tryed out the first tutorial (cavity).
Unfortunately, something doesn't seem to be right with my paraFoam. The Region Status pannel is not where its supposed to be (doesn't exist).

However, it is very important for me to check the boxes in the region status pannel, as I won't e able to see my mesh, shape and so forth.

I have read the tutuorial numerous times and I just can't find what I might have done wrong.
I did following steps:
1) I added the bashrc comand in order to run open foam in my terminal
2)cd $FOAM_RUN/tutorials/incompressible/icoFoam/cavity
3) I have done checkMesh
4) paraFoam (files which are being created through icoFoam area already there for the cavity example. But have also tryed to delete it and run the calculation from the beginnning)
It opens up my paraFoam Window, where I can also see the cavity part being which has been loaded.

Got the same issue with all other examples which are supplied with openfoam

Thank you already for your replies and help

ancsa · January 29, 2010, 09:10

I also didn't find Region Status at the beginning but the Mesh Part on the left hand side of paraFoam under properties panel seems to be just the same in my case.

oldschool · January 29, 2010, 11:29

Hello ansca, I have tryed using MeshPart, but for the case of the cavity, it won't show a provile or a mesh after clicking apply. Same thing happens with most of the other examples from the tutorial. In some case I might be able to see the simple mesh, though.
Anyone an idea what might be the issue.
Thanks in advance

January 28, 2010, 16:54	Region Status issues in paraFoam	#1
oldschool New Member stefan Join Date: Jan 2010 Posts: 3 Rep Power: 16	Hello, have just installed OpenFoam without any troubles and tryed out the first tutorial (cavity). Unfortunately, something doesn't seem to be right with my paraFoam. The Region Status pannel is not where its supposed to be (doesn't exist). However, it is very important for me to check the boxes in the region status pannel, as I won't e able to see my mesh, shape and so forth. I have read the tutuorial numerous times and I just can't find what I might have done wrong. I did following steps: 1) I added the bashrc comand in order to run open foam in my terminal 2)cd $FOAM_RUN/tutorials/incompressible/icoFoam/cavity 3) I have done checkMesh 4) paraFoam (files which are being created through icoFoam area already there for the cavity example. But have also tryed to delete it and run the calculation from the beginnning) It opens up my paraFoam Window, where I can also see the cavity part being which has been loaded. Got the same issue with all other examples which are supplied with openfoam Thank you already for your replies and help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 04:04
[OpenFOAM] Region Status Issues	oldschool	ParaView	3	May 17, 2010 08:08
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug	unoder	OpenFOAM Installation	11	January 30, 2008 20:30
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15
[Gmsh] Import gmsh msh to Foam	adorean	OpenFOAM Meshing & Mesh Conversion	24	April 27, 2005 08:19

January 29, 2010, 09:10		#2
ancsa Member Aniko Rakai Join Date: Oct 2009 Location: Geneva Posts: 30 Rep Power: 16	I also didn't find Region Status at the beginning but the Mesh Part on the left hand side of paraFoam under properties panel seems to be just the same in my case.

January 29, 2010, 11:29		#3
oldschool New Member stefan Join Date: Jan 2010 Posts: 3 Rep Power: 16	Hello ansca, I have tryed using MeshPart, but for the case of the cavity, it won't show a provile or a mesh after clicking apply. Same thing happens with most of the other examples from the tutorial. In some case I might be able to see the simple mesh, though. Anyone an idea what might be the issue. Thanks in advance