CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM (
-   -   chtMultiregionFoam Solver (

msarkar February 24, 2010 03:02

chtMultiregionFoam Solver
3 Attachment(s)
Is there anyone who already validated chtMultiregionFoam solver? I am trying to validate this solver but not getting good results to compare with published results. i got different results for different mesh gradation and I did not find any good explanation for these different results. The results are attached below. ((left to right), 1st Fig. shows block structure of the graded mesh (case 1), 2nd Fig. shows result for case 1., 3rd Fig. shows block structure for mesh gradation for case 2 and Fig 4 shows result for case 2). - @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } --> If anyone has any clue, please let me know.

Thanks for any comments.

msarkar February 24, 2010 03:56

1 Attachment(s)
Sorry, somehow 4th figure was not attached with my previous post. So, it is attached here.

All times are GMT -4. The time now is 04:06.