 |
 |
 |
|
|
|
[Sponsors] | ||||
February 24, 2010, 02:02
|
chtMultiregionFoam Solver
|
#1 |
|
Member
MSarkar
Join Date: Dec 2009
Posts: 99
Rep Power: 17  |
Is there anyone who already validated chtMultiregionFoam solver? I am trying to validate this solver but not getting good results to compare with published results. i got different results for different mesh gradation and I did not find any good explanation for these different results. The results are attached below. ((left to right), 1st Fig. shows block structure of the graded mesh (case 1), 2nd Fig. shows result for case 1., 3rd Fig. shows block structure for mesh gradation for case 2 and Fig 4 shows result for case 2). - @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } --> If anyone has any clue, please let me know.
Thanks for any comments. |
|
|
|
|
|
February 24, 2010, 02:56
|
|
#2 |
|
Member
MSarkar
Join Date: Dec 2009
Posts: 99
Rep Power: 17 |
Sorry, somehow 4th figure was not attached with my previous post. So, it is attached here.
|
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Working directory via command line | Luiz | CFX | 4 | March 6, 2011 20:02 |
| Getting too many iterations by velocity solving (aborting). Changing U - Solver? | suitup | OpenFOAM Running, Solving & CFD | 0 | January 20, 2010 07:45 |
| why the solver reject it? Anyone with experience? | bearcat | CFX | 6 | April 28, 2008 14:08 |
| compressible two phase flow in CFX4.4 | youngan | CFX | 0 | July 1, 2003 23:32 |
| Setting a B.C using UserFortran in 4.3 | tokai | CFX | 10 | July 17, 2001 16:25 |
Linear Mode
