CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

mass flux and temperature b.c with cyclic conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 5, 2010, 06:14
Default mass flux and temperature b.c with cyclic conditions
  #1
Member
 
David
Join Date: Dec 2009
Location: Spain
Posts: 62
Rep Power: 16
David_010 is on a distinguished road
Hi to all

I want to simulate a scraper surface heat exchanger which consists in a circular duct with scrapers inserted inside it. Im using cyclic conditions to simulate only one pitch between scrapers but I need to fix the mass flux, not the velocity. Can anyone explain how to do that? Also Im applying a constant heat flux on the walls, and the inlet and outlet temperature has also cyclic condition, I don't know if it is correct.

Thankyou very much in advance for your attention

David
David_010 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
How to set a initial temperature and constant heat flux at same BC's?? Jane FLUENT 4 October 25, 2015 13:01
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Concentric tube heat exchanger (Air-Water) Young CFX 5 October 7, 2008 00:17
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 00:50.