CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

Hydrostatic Boundary condition for multiphase model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 18, 2010, 02:10
Default Hydrostatic Boundary condition for multiphase model
  #1
Member
 
Ali Torbaty
Join Date: Jul 2009
Location: Sydney, Australia
Posts: 72
Rep Power: 9
AliTr is on a distinguished road
Does anyone know a sample or can help on setting up a hydrosatic pressure BC on a Channel inlet? I need to apply a pressure profile of p=rho.g.h over inlet, where water Volume Fraction=1 and p=0 where Air VF=1.
AliTr is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 45 February 8, 2016 05:42
Epsilon boundary condition for walls in LamBremhorst LowRe model maruthamuthu_venkatraman OpenFOAM 0 March 16, 2010 04:27
Water vapour condensation in CFX-5.7.1 hdj CFX 1 November 27, 2005 08:15
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Pressure Boundary Condition Matt Umbel Main CFD Forum 0 January 11, 2002 11:06


All times are GMT -4. The time now is 16:25.