CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM (https://www.cfd-online.com/Forums/openfoam/)
-   -   Compressible flow (https://www.cfd-online.com/Forums/openfoam/76750-compressible-flow.html)

Rickard.Solsjo June 3, 2010 08:36
Compressible flow
 
Does anyone know or have experienced with a good compressible flow solver which takes into account high Mach number (Ma~1.7-2.0). It should also be possible to take into account the density difference of the injected fuel and the ambient gas. I am supposed only to simulate a single gas phase so that has to be taken into account

- - -
Rickard

KrisT June 5, 2010 02:30
Quote:
Originally Posted by Rickard.Solsjo (Post 261526)
Does anyone know or have experienced with a good compressible flow solver which takes into account high Mach number (Ma~1.7-2.0). It should also be possible to take into account the density difference of the injected fuel and the ambient gas. I am supposed only to simulate a single gas phase so that has to be taken into account

- - -
Rickard
Don't know about the LES part, but sonicFoam does not capture shocks correctly (rhoCentralFoam does).

Rickard.Solsjo June 7, 2010 05:15
Okay, but there are like six different solvers there, which one is better?

KrisT June 7, 2010 06:30
Don't know. But you can find some information here.


All times are GMT -4. The time now is 03:44.