[ronaldo]

I would like to make a VOF-Simulation (air and Water) using InterFoam. Could someone advise me how to set my system and constant-Directories?
how to set pd in the "0" dirctory?

I am waiting and hoping for your advice.
Thanks
Ro

[ovie]

There is a tutorial on InterFoam in the OpenFOAM user's guide. You should review it. It contains step by step description of what you need to do to implement the InterFoam solver and how to set up the problem. You can also take a look at the tutorial case on InterFoam in the software bundle. It already contains an illustration of how the solver is implemented. YOu can copy this and edit the files to suit your problem.

Hope this helps.

[ronaldo]

Originally Posted by ovie

There is a tutorial on InterFoam in the OpenFOAM user's guide. You should review it. It contains step by step description of what you need to do to implement the InterFoam solver and how to set up the problem. You can also take a look at the tutorial case on InterFoam in the software bundle. It already contains an illustration of how the solver is implemented. YOu can copy this and edit the files to suit your problem.

Hope this helps.

Thanks Ovie,

I will try that and let you know what happens

Thanks so much

[nimasam]

hi dear foarmer
bubble rising is simulated in 2D axiymmetric mesh by interFoam successfully but how can i calculate the bubble rising velocity (terminal velocity)?