CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

boundary condition P1/MarshakRadiation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 12, 2010, 05:48
Default boundary condition P1/MarshakRadiation
  #1
New Member
 
Join Date: May 2010
Location: Cologne
Posts: 27
Rep Power: 15
marcbest is on a distinguished road
hello everbody,

I have a question concerning radiation simulations. I want to simulate Sandia Flame D with radiation. around the flame there should be no cover. so it is an open space i.e. openWall. should i use zeroGradient or MarshakRadiation for this?

openWall
{
type zeroGradient;
}
or

openWall
{
type MarshakRadiation;
T T;
emissivity 0; (= no emissivity)
value uniform 0;
}

what must I use at streaming in- and outlets? I'm asking because in the bouyantSimpleRadiationFoam/hotRadiationRoom case there are only walls and neither open patches nor in/outlets...

Thanks in advance

Marc

Last edited by marcbest; July 12, 2010 at 08:32.
marcbest is offline   Reply With Quote

Old   July 12, 2010, 08:41
Default
  #2
New Member
 
Join Date: May 2010
Location: Cologne
Posts: 27
Rep Power: 15
marcbest is on a distinguished road
here you can see the G-file if this helps
and wall should be the "open" wall
Attached Files
File Type: txt G.txt (2.1 KB, 248 views)

Last edited by marcbest; July 13, 2010 at 11:17.
marcbest is offline   Reply With Quote

Old   June 19, 2018, 15:18
Default
  #3
New Member
 
Germilly Barreto
Join Date: Jul 2016
Location: Portugal
Posts: 25
Rep Power: 9
Germilly is on a distinguished road
Hello marcbest,

Have you found a solution for your problem?
I think I'm facing with the same problem.

I have posted a question in the following thread:

Understanding the Marshak boundary condition (radiation)

can you please help me?

Best regards
GB
Germilly is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boundary Conditions Thomas P. Abraham Main CFD Forum 20 July 7, 2013 06:05
Transient outlet boundary condition problem jwillie2000 CFX 1 December 7, 2009 18:07
Axis Boundary Condition..what is it? CFDtoy FLUENT 6 February 13, 2007 06:51
How to set boundary condition in Fluent for the fo Peiyong FLUENT 1 November 10, 2006 12:44
How to resolve boundary condition problem? sam FLUENT 2 July 20, 2003 03:19


All times are GMT -4. The time now is 17:29.