CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

DieselFoam massflow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 10, 2010, 06:40
Default DieselFoam massflow
  #1
Senior Member
 
Rickard
Join Date: May 2010
Location: Lund, Skåne, Sweden
Posts: 143
Rep Power: 15
Rickard.Solsjo is on a distinguished road
Hi !
I think I'm getting errors due to perhaps using a top-hat for injecting my fuel into my cylinder. I'm injecting for about 200microseconds with just 0.7mg of fuel. I read in another post that using a top-hat or similar, a too high temperature can be obtained causing an error due to the interpolation scheme.
Does anyone have experience in this ?

Thx
R
Rickard.Solsjo is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
injector model in dieselFoam leejc OpenFOAM 8 April 3, 2018 13:30
axi-symmetric mesh of dieselFoam az1362f OpenFOAM Running, Solving & CFD 2 June 27, 2009 12:32
calculate MASSFLOW for a component MAldaz CFX 1 November 7, 2007 12:41
massflow outlet in flunet. shrinath FLUENT 0 September 3, 2007 10:40
re: Massflow reset in CFX 10 Wooster CFX 5 March 16, 2007 21:08


All times are GMT -4. The time now is 13:26.