CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

Meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 23, 2010, 08:31
Default Meshing
  #1
Senior Member
 
Rickard
Join Date: May 2010
Location: Lund, Skåne, Sweden
Posts: 143
Rep Power: 15
Rickard.Solsjo is on a distinguished road
Hi, I just wonder about this simple-and edgeGrading
If I have injection at the origin in the middle of a plane, is it possible to adjust the grading to that the contraction is localized around the injection point?

Thx
R
Rickard.Solsjo is offline   Reply With Quote

Old   November 24, 2010, 01:48
Default
  #2
Senior Member
 
Nakul
Join Date: Apr 2010
Location: India
Posts: 147
Rep Power: 15
nakul is on a distinguished road
Hi,
You may refer to user guide for exact details of grading.

As far as I think it might be possible to have some grading on the injection hole but it would be very difficult.

It would be easier if you make a block over that hole with one face of the block patched as "hole", then you can increase number of grid points in that hole as per your desire.
nakul is offline   Reply With Quote

Old   November 24, 2010, 03:25
Default
  #3
Senior Member
 
Rickard
Join Date: May 2010
Location: Lund, Skåne, Sweden
Posts: 143
Rep Power: 15
Rickard.Solsjo is on a distinguished road
Its okay, there will be aspect ration problems, Ill try something else!
Rickard.Solsjo is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] Desperate student needs help meshing 3D GAMBIT model - please help! lau06165 ANSYS Meshing & Geometry 1 March 22, 2010 02:09
Best Meshing scheme for Cylinder Nutrex Main CFD Forum 4 July 29, 2008 12:03
Meshing locks workbench window. andy2o CFX 0 February 1, 2008 06:01
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 12:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 12:08


All times are GMT -4. The time now is 13:51.