ParaFoam Paraview ask me to "Open data with"

idrama · December 2, 2010, 04:24

Hello Foamers,

I compiled paraFoam/paraview. Now when I entering paraFoam in my case directory, it asks me to choose a data source: "Open data with". After I have clicked on OpenFOAM it moves on and the data a there, but I want to get rid of it. I want to have is as usual. What do i do?

tookey_1989 · December 3, 2010, 09:57

I have this problem each time I've had to freshly compile Paraview. If you recompile the PVfoamReader under applications/utilities/postprocessing/graphics and that should do the trick.

James

DiegoNaval · December 3, 2010, 10:14

Hi
I have the same problem with a binary version of Paraview, for OF1.7 how can I say to paraview to open always a .openfoam file with the same reader?

thanks?

Diego

wyldckat · December 4, 2010, 08:38

Greetings Diego,

Quote:

Originally Posted by DiegoNaval

I have the same problem with a binary version of Paraview, for OF1.7 how can I say to paraview to open always a .openfoam file with the same reader?

Try following the point number 7 from this blog post: Using the official pre-built ParaView 3.8.0 version with OpenFOAM...

Best regards,
Bruno

idrama · December 6, 2010, 04:18

It works! Thank to ya all!

December 2, 2010, 04:24	ParaFoam Paraview ask me to "Open data with"	#1
idrama Senior Member Claus Meister Join Date: Aug 2009 Location: Wiesbaden, Germany Posts: 241 Rep Power: 18	Hello Foamers, I compiled paraFoam/paraview. Now when I entering paraFoam in my case directory, it asks me to choose a data source: "Open data with". After I have clicked on OpenFOAM it moves on and the data a there, but I want to get rid of it. I want to have is as usual. What do i do?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] Paraview: Cell data and Point Data?	vitor	ParaView	4	May 15, 2015 17:56
[OpenFOAM] extracting data from paraview	tharem	ParaView	1	January 17, 2011 23:45
[General] paraview - plotting difference to reference data	joewe	ParaView	0	August 30, 2010 18:01
paraFoam reader for OpenFOAM 1.6	smart	OpenFOAM Installation	13	November 16, 2009 21:41
How to update polyPatchbs localPoints	liu	OpenFOAM Running, Solving & CFD	6	December 30, 2005 17:27

December 3, 2010, 09:57		#2
tookey_1989 New Member James Join Date: Jan 2010 Posts: 6 Rep Power: 17	I have this problem each time I've had to freshly compile Paraview. If you recompile the PVfoamReader under applications/utilities/postprocessing/graphics and that should do the trick. James

December 3, 2010, 10:14		#3
DiegoNaval Member Diego Villa Join Date: Mar 2010 Location: Genova Italy Posts: 37 Rep Power: 17	Hi I have the same problem with a binary version of Paraview, for OF1.7 how can I say to paraview to open always a .openfoam file with the same reader? thanks? Diego

December 6, 2010, 04:18		#5
idrama Senior Member Claus Meister Join Date: Aug 2009 Location: Wiesbaden, Germany Posts: 241 Rep Power: 18	It works! Thank to ya all!