[dahlia-2005]

I am trying to import GRImech3.0 to reactingFoam, and I use the chemkintoFoam utility. The thermo30.dat can be changed to thermo.compressibleGas(When I added "All" in the back of "THERMO" in the thermo30.dat ) successfully.

but the simulated highest temperature is so low (<1500K ). I do not konw the reason, and I can not find the solution from CFD-online-openfoam.

Anyone can help me? thank you in advance.

[nakul]

Hi,

The discrepancy in temperature field could be due to many reasons when using reactingFoam solver. Do mention more details of your case to get proper advice.

[dahlia-2005]

Hi,nakul, Thank you for your reply.
I have tried an example case for reactingFoam:/ http://openfoamwiki.net/index.php/Tu...._firstTutorial. In this case, the fuel gas is C7H16 (290 reactions), my simulation result is reasonable.

so I modified the format of two files(gimech30.data and thermo30.dat) of GRI_Mech3.0 according to this case(see the attached files), but the errors are as follows:
C6H7
CLSI(CH3)3
C7H15O2
MGF2(S)
N2O+
CHCL2CCLO
CA(L)
SO2
n-C6H5
BEH2
H2CCHSI
CA(A)
CH2CCL
SIH2F
C5H4O
KH(S)
A2C2HB
NO3
SI(NH2)3
HCO+
CH3CH2O
H2CCCCH2
GAET
I*C3H7
H2CCHSIH
SIH3NSIH3
MGSO4(S)
A4-
BEBR2(S)
C2H6
CH3OCL
BECL
NAOH(L)
K2B8O13(S)
CCL3CHO
NO2
CSICL3
K3CL9AL2(S)
H2O(L)
l-C6H4
SICL2H2
H3SISIH
SI2CL5H
C2
CABR
NA(L)
HALME
HCCSICL2H
CL
HE
A3
GAME3
CH2
NACH
NACN(S)
H2CCC
FSIN
A3-4
CLHCO
SIF3
i-C4H3
KCN(S)
H2S
SIH3NH2
CH2CHCL
BEBO2
N2
MGBR2+
C-
NO+
A2HR5
.
.
.
.
OCHNNHO
S-TRIAZINE
NAO-
)


From function HashTable<T, Key, Hash>:perator[](const Key&)
in file /home/lhu/OpenFOAM/OpenFOAM-1.7.0/src/OpenFOAM/lnInclude/HashTableI.H at line 110.

FOAM exiting

I have no ideas about this error. Then I tried to use chemkintoFoam utility, but the simulated temperature is so low as I have said .

I think I did not provide the correct format of GRI_Mech3.0 to Openfoam, but I do not know how to do it. can you give me some suggestion or give me the correct input format of GRI3.0? thank you very much!

dahlia

[dahlia-2005]

see the attached files mentioned above.

[gschaider]

Originally Posted by dahlia-2005

Hi,nakul, Thank you for your reply.
I have tried an example case for reactingFoam:/ http://openfoamwiki.net/index.php/Tu...._firstTutorial. In this case, the fuel gas is C7H16 (290 reactions), my simulation result is reasonable.

so I modified the format of two files(gimech30.data and thermo30.dat) of GRI_Mech3.0 according to this case(see the attached files), but the errors are as follows:
C6H7
CLSI(CH3)3
.
.
<snip>
.
OCHNNHO
S-TRIAZINE
NAO-
)


From function HashTable<T, Key, Hash>:perator[](const Key&)
in file /home/lhu/OpenFOAM/OpenFOAM-1.7.0/src/OpenFOAM/lnInclude/HashTableI.H at line 110.

FOAM exiting

I have no ideas about this error. Then I tried to use chemkintoFoam utility, but the simulated temperature is so low as I have said .

I think I did not provide the correct format of GRI_Mech3.0 to Openfoam, but I do not know how to do it. can you give me some suggestion or give me the correct input format of GRI3.0? thank you very much!

dahlia

Probably your chemistry uses a species that is not in the table of thermophysical data. What you shared here with us is a part of those existing species. Which species it was looking for is at the top of the error message (which you didn't hsare with us)

Bernhard

[dahlia-2005]

Thank you very much! Bernhard, yes, the total error message is as follows:

Create time

Create mesh for time = 0

Reading chemistry properties


Reading g

Reading thermophysicalProperties
Selecting psiChemistryModel ODEChemistryModel<gasThermoPhysics>
Selecting thermodynamics package hsPsiMixtureThermo<reactingMixture<gasThermoPhysic s>>
Selecting chemistryReader chemkinReader


--> FOAM FATAL ERROR:
HCNN not found in table. Valid entries:
820
(
CL3SISICL
A2C2HB*
SIF3NH2
C2H3O
GAET2
CACL2
SIF3NH
H2GAME
NA2O2
BEO(B)
H2CCHO
FNNF
C5H3
NFO2
CHCLCCL
C2H5
SICCH
S(L)
BEI2
A1C2H3*
C(S)
CL2SISICL
NNH
A3C2H2
NAO2(S)
H2
CLSISI
CLOCL
NA+
H2NF
CCL
HGO
H2CNH
CHCL2CHCL2
A1-
BEI2(S)
MGC2(S)
H2CCCH
CLO
K(L)
F3SIN
CLH2CO
C8H
F2
CH+
H3SINH
KBR(S)
NABR(S)
n-C4H3
SIFNH2
HCL
CH2CLCHCL
HASGAET
i-C6H5
P2-
BESO4(GAM)
N2H2
H2CCCCCH
NABR
CSICL
MGF2+
A2R5
HALME2
CCL2OHCHCL
CS
C+
SIFNH
HCN
HOCL
CH3CC
NAO
AR+
H2CN
CH2OHCCL2
SI2H6
KF
H3ASGAET3
CH3CO
C3H5
MGOH+
HCL2SISICL2H
NA2SO4(i)
CL3COH
C2O
ASGAMEH
HN(OH)2
MG2C3(S)
NAF2-
HONO2
CL2COH
C5H6
KBO2(S)
CHCL2CH2
CL2
HCNO
OH+
BEF
AS4
NFO
KF(S)
H
H3SICH
CH2SICL3
CH2SICL
HMEGAET
NO
SI(CH3)3
AL
FO
HG2BR2(S)
BEOH
C5
K2H2O2
CCLH2OO
CH3HCO
KCL
KCL(S)
BEH2O2(A)
BEH+
MGF
C2HCL5
HCLCCCLO
NABH4(S)
E
CCL4
NAF4AL
GAAS(3,C)
CHSICL3
HSI(CH3)2CH2
KH
BEH2O2
KO
CL2SISICL2
H3SIC
HCO
SICL3CH2CH
H2SI(CH3)2
KO-
CH3CH2CL
CLCO
A1C2H)2
CH3SIH2SIH2CH3
CAF
SIFH3
SICL4
A1C2H3
H2SISIH2
SI2CL6
K2SO4(B)
C2F6
SI2
CH3CL
C3H2
H2CCCCH
P2-H
HG2I2(S)
KBO2
MEGAET
OCHCHO
C3H6
CAOH
CHCLCHCL
MGO(S)
HSI(CH3)2
C6H2
SIF2NH2
KOH
CABR2
SI(NH2)4
H2SICH
CH3OCH3
HNO
A2C2HA
C6H6
CH3SICL
CH3F
N3
H2ASME
n-C6H7
CL2SI(CH3)CH2
C2H2
HGF2(S)
CSICL2
BECL2
H2SICH3
C4H2
NA
SIH2CL
HG2CL2(S)
HOCH2OH
SIF3NHSIH3
SN
C5H5
AS3
CH3ONO
H3CONHO
MGS(S)
ALH
BESO4(A)
MG2BR4
CHSIHCL2
SIH3NHSIH3
H2SI(NH2)2
K3CL6AL(S)
c-C6H7
CH3O
C3
BE2SIO4(S)
MG
ALME2
K2B4O7(S)
K3F6AL(S)
ASGAET2
C6H3
CNO
CL3SICH3
SIH3SIH2CH3
CH2OHCHCL
CCL3
K2
CL2SICH3
CCL2CCLO
SIHCL2
NA2O(S)
KCLO4(S)
HCLSICH2
SIHF
OH
GAH
CSIH2CL
N
HSICL
CO2-
MGN
MGBR
CCL3OO
H2CCH2OH
CHCL2CHCL
CH3CH2CCH
MGH2O2(S)
C7H14O2H
H2CCH(SICL2H)
GA2H6
C7H15-2
CL2CO
ASME3
C5H2
SI
CL2SI(CH3)2
S
N2O
NA3CL6AL(S)
SO3
H2SIC
BEN
ME2GAET
P2
CCL3CCLO
CH2CCLOH
CL2CCHCL
NAO2AL(S)
SI2C
HGCL2
N2O4
CH3CHOH
CH2CLCH2
BEH2O2(B)
C6H12
BE3N2(A)
GAH2
HCCCHCCH
AR
C2N2
SIF(NH2)3
i-A1C2H2
CL2HCO
CHCLCH
GAET3
HNCN
MG2F4
SICH2
SIF
CH2CO
ASALME
CLCOH
KBR(L)
CHF
N2H4(L)
NA2SO4(D)
BECLF
ASGAME2
NAI(S)
CA
HSISICL
MGAL2O4(S)
H2CCC(S)
A1C2H
CLSI(CH3)2
CL2CCHO
CH4O2
MGH2(S)
NAH
AL2ME6
C4H8
H2CNNO
CCL2CCLOH
NACL
C
CH2CL
HASGAME
HGH
CH3CHO
CH2CLCHO
MGB2(S)
SH
NCN
SIF2
C6H7
CLSI(CH3)3
C7H15O2
MGF2(S)
N2O+
CHCL2CCLO
CA(L)
SO2
n-C6H5
BEH2
H2CCHSI
CA(A)
CH2CCL
SIH2F
C5H4O
KH(S)
A2C2HB
NO3
SI(NH2)3
HCO+
CH3CH2O
H2CCCCH2
GAET
I*C3H7
H2CCHSIH
SIH3NSIH3
MGSO4(S)
A4-
BEBR2(S)
C2H6
CH3OCL
BECL
NAOH(L)
K2B8O13(S)
CCL3CHO
NO2
CSICL3
K3CL9AL2(S)
H2O(L)
l-C6H4
SICL2H2
H3SISIH
SI2CL5H
C2
CABR
NA(L)
HALME
HCCSICL2H
CL
HE
A3
GAME3
CH2
NACH
NACN(S)
H2CCC
FSIN
A3-4
CLHCO
SIF3
i-C4H3
KCN(S)
H2S
SIH3NH2
CH2CHCL
BEBO2
N2
MGBR2+
C-
NO+
A2HR5
C4H612
K2B6O10(S)
MGH2O2
SO
C2H4
C3H4
HNF2
BECL2(B)
HGCL2(S)
SINH
SIF2N
HE+
HCCOH
CH2(S)
KI(S)
HCOOH
GAH3
SICL
C3H4P
A2-1
PC3H4
MG(S)
HGF2
O3
HF
SI(CH3)2
(CH2O)3
KI(L)
NA2B4O7(S)
MGCL
N2H4
CO
CAH2O2(S)
CCL3CH2
SIF3NSIH3
MGF2
C5H12
KOH+
AS
NA2SO4(iii)
CLSI(CH3)2CH2
CH
HCCCL
n-A1C2H2
HGBR
SIN
F
SI3H8
MGS
ASGAME
NA2C2N2
SI3
MGCO3(S)
CLSICH3
ALME
C5H5O
CH2CHCHCH2
CA+
CACL
N2H3
H2C4O
MG(L)
ASH2
CCL2OHCH2
i-C4H5
HASALME
KF(L)
H2CNO2
HASME
CL2SISI
KBR
HNO3
CLSISICL
CHSIHCL
C8H2
CN2
ASGAET
H2SI(CH3)CH2
MGOH
H2SINH3
CCL2
CH2O
SIH3
BE3B2O6(S)
CH2SIH2CL
SI(CH3)4
C6H5
BE3N2(L)
NH
NA2F2
CHF3
CHCL2CCL2
SICLH3
SICH3
C2CL6
CH2HCO
ALH3
CHCLCCLOH
H2CCCLO
SIC
KCL(L)
CA2
CH3CCL2
C5H11CHO
C2CL5
H2SINH
H2CCHSIH2
CLCCCL
BEB2O4
CH2CCL2
HG2F2(S)
SIF2(NH2)2
C6H10
GAAS(3,L)
BEBR2
A2C2H)2
HSINH2
BE
CH4
H3SICH2
ASME2
MEGAET2
CCL2HOO
O
C3H2(S)
C4
BE(S)
HNCNH
CH2CHCH2
NA2H2O2
K2CO3(S)
H3SIN
C6H4
C5H
CH2F2
GAAS(5,L)
SI(CH3)3CH2
C6H5OH
CH2SIHCL2
KCL4AL(S)
CH2*
AS2
SI2F6
K+
C2N
CH3SIH2SIH
CL3CO
HOCO
C3H4C
i-C6H7
CLCH2OH
CHCLOHCHCL
KO2(S)
C7H14O2HO2
H2CLSICH3
GA
C3H7
CLCCO
ALAS
MGH
C6H8
C7KET21
H2CNO
CH3SIHCL2
NA2SO4
SICL3H
C4H3
H2NNO
C3O2
NAF
C4H6
H3SISIH3
K2O(S)
CH2CHCHCH
CH3O2
CH3CHCH
c-C6H4
C4H10
H2O
O+
ONHNOH
SICL2
NA2B6O10(S)
SIHF3
CAO(S)
CABR2(S)
HCLSICH3
NAOH+
ASALME2
SI2H5
n-C4H5
CHSICL2
CH2CLCCL2
HGI
C5H4OH
C7H15-1
H2SINH2
A2
CN-
CAOH+
KI
CH3CH2CH2C
NA2O(L)
CH3CHCL2
HCLSISI
HSINH
BEF2
NA2SO4(v)
NACN
CAI2
H2CCHSIH3
HCCHCCH
A1
CL3CCO
HNO2
MGCL2
CL2CCCL2
SIH
MGCL2(S)
BEAL2O4(S)
C6H
HSIC
NO2-
ALH2
HSICCH
MG2
H-
ASME
HSICH3
COS
C6H14
CH3CCH2
S(S)
BESO4(B)
C3H8
H2NO
NACL4AL(S)
CH3CCCH2
K2SO4(A)
CO2
NH3
A2C2H2
naphthyne
HCLCCHO
CHCLOH
HN3
l-C6H6
HASME2
K2SO4
A3-1
C4H9
HGAME
A3C2H
CACL2(S)
HNCO
CAO
MG+
CAI
CH3CCL3
HNNHO
KCN
BEH
F2SINH
CL(CH3)SICH2
GAME2
CAS
SI2H2
SI(L)
HCLSI(CH3)2
CH2CLCCLO
AL2H6
HNNO
NABR(L)
H2CNCH2O
ASH
SIHF2
S+
HSIN
NA3F6AL(S)
C6H5(L)
HSICH2
CNN
HONO
CL2CHOH
N*C3H7
H2CNCHO
HNOH
SICH
C2H
H2CNNO2
C7KET12
CH3NO2
HSI(NH2)3
SINH2
KBF4
A4
BEO(A)
BES(S)
KCN(L)
(CH3)2SICH2
CH2OH
H2CNCH2
CH3NO
CSIHCL2
CH3CCL
H2O2
SI2H3
CS2
O2
H2SICCH
S2
HCCO
CHSICL
SIH2F2
A1C2H*
NF
HCLSI(CH3)CH2
HGAME2
NABO2
CH2CLCHCL2
BEI
HO2
C5H11CO
ONHNHO
H3ASGAME3
NA2SO4(iv)
CH3OH
H2NOH
HCL2SICH3
HNC
H2GAET
CAH2O2
FO2
C7H16
MGBR2
CH3CCCH3
NABO2(S)
CH2CL2
NACL(S)
HSI(NH2)2
HSI(CH3)3
H2SIN
NAOH
C2HCL
SIH4
C2H3
CCL3CCLH2
SICL3
CH3C(O)CL
HOCN
CCL3CHCL
CH3
CH3CHCL
HCNH
H3SICCH
ALME3
HGO(S)
C4H
GAME
HNF
H2CONO
A2C2HA*
CL3SISI
A1C2H-
CHCL
SIF(NH2)2
CH3CCLO
HNNONO
O2-
SIF4
H3SICH3
SI2CL5
HGAET
SIH2
CHCL2
CCL2CH
OC(OH)2
CHOHCLCCL2
NH2
C3H3
SI(S)
H2O(S)
CHSIH2CL
H(CH3)SICH2
CAF2
BECL2(A)
BEBR
DIOXANE
CHCLCHOH
H2ALME
CLOO
CA(B)
CN
H2SICH2
CL2SICH2
A1C2HC2H2
K2O2(S)
NA2
SI3N4(A)
SIC(B)
HGAET2
K
CN+
CHCL3
BEF2(L)
H2CNNHO
A4H
CH2CLCH2CL
GAAS(5,C)
CH3ONO2
A2-2
ASH3
CH2CHO
C2CL3
CHCLOHCH2
SIC2
C2-
C6H5O
OH-
C5H11
CSIHCL
H2CLSISICL3
GAAS
O-
NCO
CH2CHCCH2
CH2CHCCH
H+
FNO3
OCHNNHO
S-TRIAZINE
NAO-
)


From function HashTable<T, Key, Hash>:perator[](const Key&)
in file /home/lhu/OpenFOAM/OpenFOAM-1.7.0/src/OpenFOAM/lnInclude/HashTableI.H at line 110.

FOAM exiting


but HCCN is in my thermo.dat (please see the attached file named thermo.dat.txt above), so I am confused. Do you know the reason ?

dahlia

[gschaider]

Originally Posted by dahlia-2005

Thank you very much! Bernhard, yes, the total error message is as follows:

Create time

Create mesh for time = 0

Reading chemistry properties


Reading g

Reading thermophysicalProperties
Selecting psiChemistryModel ODEChemistryModel<gasThermoPhysics>
Selecting thermodynamics package hsPsiMixtureThermo<reactingMixture<gasThermoPhysic s>>
Selecting chemistryReader chemkinReader


--> FOAM FATAL ERROR:
HCNN not found in table. Valid entries:
820
(
CL3SISICL
A2C2HB*
SIF3NH2

<snip>

H+
FNO3
OCHNNHO
S-TRIAZINE
NAO-
)


From function HashTable<T, Key, Hash>:perator[](const Key&)
in file /home/lhu/OpenFOAM/OpenFOAM-1.7.0/src/OpenFOAM/lnInclude/HashTableI.H at line 110.

FOAM exiting


but HCCN is in my thermo.dat (please see the attached file named thermo.dat.txt above), so I am confused. Do you know the reason ?

dahlia

But I doubt that your thermo.dat is used. I havn't counted them but there is no way that there are 820 species in there (the file doesn't even have that many lines)

[nakul]

Hi

As Bernhard pointed out there might be some problem with your "thermoPhysicalProperties" file. Share your case and we'll see what can be done.

[dahlia-2005]

Hi,Bernhard and nakul, thank you all! Please see the content of thermophysicalproperties as follows, Is there any error?



/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.7.0 |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/

FoamFile
{
version 2.0;
format ascii;

root "";
case "";
instance "";
local "";

class dictionary;
object thermodynamicProperties;
}

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

thermoType hsPsiMixtureThermo<reactingMixture<gasThermoPhysic s>>;

CHEMKINFile "$FOAM_CASE/chemkin/chem.inp";

CHEMKINThermoFile "~OpenFOAM/thermoData/therm.dat";

inertSpecie N2;


/************************************************** *******************/



dahlia

[Alish1984]

Hi Foamers

I have the same problem and the same error while using GRI mech 3 (chemkin format)
is there a GRI mech 3 and thermodynamics of it with foam reader format which we can download and use?

tanx

[Alish1984]

Hi Dahila

In the OF171 userguide it said that chemkinToFoam
"Converts CHEMKIN 3 thermodynamics and reaction data files
into OpenFOAM format
"
I think one of the problems is that the chem.inp(GRI 3 mechanism) is in the chemkin II format.

someone can help me on using the files chem.inp and therm.dat (GRI mech 3 and its thermo file) in openfoam?
the chemkin reader also cant read these files

[dahlia-2005]

Hi,Ali, I did not solve this problem.
but I heard that OF1.5-dev+cantera can be used to simulate methane combution, so I am just trying to do it, I think you can search some information about cantera if you like.

[Alish1984]

Dear dahila

I used DRM22 http://www.me.berkeley.edu/drm/ -which is a reduced version of GRI mech 1.2 with 22 species- for methane combustion with OF171 and OF15dev successfully but DRM22 does not have NOX and i decided to use GRI mech 3 and it was the time my problems start

if u don’t want to analyze Nox formation I advise u to use this mechanism.
I dont want to use nor cantera neither chemkin,I must use OF171 or OF15dev in my project and the problems always occur when there is some MUST or MUST not.....

[dahlia-2005]

Ali,thanks a lot!

just now I downloaded drm.dat and thermo12.dat,

In the example case for reactingFoam:/ http://openfoamwiki.net/index.php/Tu...._firstTutorial.I changed the fuel gas to CH4, and used drm.dat (chem.inp)and thermo12.dat (thermo.dat) in "chemkin" directory, but when I run the case, there is an error,

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Reading chemistry properties


Reading environmentalProperties

Reading thermophysicalProperties
Selecting thermodynamics package hMixtureThermo<reactingMixture>
Selecting chemistryReader chemkinReader


while reading reaction specie on line 20
expected '+' but found '"<"=>H+HCO 1.500E+13 0.000 0.00 '

From function chemkinReader::lex()
in file chemistryReaders/chemkinReader/chemkinLexer.L at line 1502.

FOAM exiting


so how should I modified drm.dat and thermo12.dat? thanks again!

dahlia

[Alish1984]

Hi

u should do some modifications first,
1.replace CH2(s) with CH2S in chem.inp and therm.dat
2.use the dieselFoam tutorial (aachenBomb) therm.dat

I place the corrected files here also

[Alish1984]

These are the chem.inp and therm.dat files for using DRM22 mech

[dahlia-2005]

Ali, it is so kind of you.

but when I use your kineticFiles, there is still an error:
------------------------------------------------------------------------------------------------------------------------------
Create time

Create mesh for time = 0

Reading chemistry properties


Reading environmentalProperties

Reading thermophysicalProperties
Selecting thermodynamics package hMixtureThermo<reactingMixture>
Selecting chemistryReader chemkinReader


CH2S not found in table. Valid entries are
820
(
CH3CHCL
CL2SISICL
CH3CHCH
SIF2N
A2C2H>2
CH3OCL
CH2CCLOH
CL2CO
CH3HCO
CHSIHCL
CH2CHCL
CCL2OHCHCL
CL3CO
CL2SICH2
CHSIHCL2
CL2SICH3
CH3ONO
HG2CL2<S>
NAO2AL<S>
CH2HCO
H3SICCH
CH3ONO2
S-TRIAZINE
CH3CHOH
CH2CHCH2
SIH3NSIH3
BE<S>
。
。
。
。
。
CLCH2OH
H2SISIH2
CCL3CCLO
H3SICH2
H3SICH3
)


From function HashTable<T, Key, Hash>:perator[](const Key&)
in file /home/hly/OpenFOAM/OpenFOAM-1.5-dev/src/OpenFOAM/lnInclude/HashTableI.H at line 81.

FOAM exiting
----------------------------------------------------------------------------------------------------------------------

CH2S has been in therm.dat. I guess I should modify anything else?
thank you very much!

dahlia

[Alish1984]

Hi

I check these files now and there was no error!
check your thermophysical properties file u use the right file(therm.txt and chem.txt)
I've confused with this error,I cheked these files in OF171 and I've used them in OF15dev also
really dont know whats the proplem!!!

[dahlia-2005]

Hi,Ali, I changed the location of the CHEMKINThermoFile from
"~OpenFOAM/thermoData/therm.dat" to "$FOAM_CASE/chemkin/therm.dat", Is that true?

then my case can be run now . If the result is resonable, I will tell you. I am very grateful for your help.

but in case of "aachenBomb" (dieselFoam tutorial), the location of the CHEMKINThermoFile is "~OpenFOAM/thermoData/therm.dat", I can not understand. Do you know where is "~OpenFOAM/thermoData/therm.dat"?

so maybe GRI3.0 could be used if we modify it correctly.

[Alish1984]

The location of the kinetic and thermo file is not important,you should just write the right path of the files in the thermophysical properties file