CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM (
-   -   open foam programmer (

gkretro January 27, 2011 16:27

open foam programmer
I am looking for an expert on open foam to run flow simulations and thermal
simulations for a design.
Thanks for your time.

nakul January 28, 2011 04:10

Hi Greg,

I am interested. Could you provide some details as to what sort of expertise you are looking for, what needs to be done, type of work and its details.

mvoss January 28, 2011 04:24


so am i. Please specify your desired physics a bit more.


gkretro January 28, 2011 13:09

What I am looking for ,is to simulate the mixing of fuel/oxdizer
in a coaxial injector.To determine a stable flow regimes.
I have considerable data on the subject but no conclusive dimensional
numbers .
Thank you for your time .

nakul January 28, 2011 13:19


Do you want to simulate the injector or combustor?

Please tell some more details regarding the nature of the project!

gkretro January 28, 2011 13:24

Just the injector for now,The end result we are looking for is to define
the limits of the stable flow region,without exposing hardware to
dangerous unstable conditions.


gkretro February 2, 2011 16:41

Well i found uploading a huge pdf files to the forum is out of the question,
So i guess i need to ask what specific information is needed to model the
the coaxial injector?

Bernhard February 3, 2011 03:36

Are you looking for a volunteer, or do you have something to offer? Is it a job vacancy, free lance work? I'm not sure this is best place to look for it, but if you keep everything vague, nobody will seriously respond.

akidess February 3, 2011 04:38


Originally Posted by gkretro (Post 293336)
Well i found uploading a huge pdf files to the forum is out of the question,

Then upload it to google docs, or any other file hosting service.

gkretro February 3, 2011 13:18

were from here?
I am Looking for some help programming.
I am sorry to be cryptic in some of my responses but as some
might realize there are itar concerns,so i am staying strictly with
public domain sourced information.
I am asking those with the knowledge of open foam,what data
I would need to supply to complete a stability simulation of the
coaxial injector.

You can see the basics at:

The inner orifice will carry gaseous oxygen at 4000psi and the
outer orifice will carry liquid methanol at 4000psi


All times are GMT -4. The time now is 16:28.