open foam programmer

gkretro · January 27, 2011, 15:27

Hello,
I am looking for an expert on open foam to run flow simulations and thermal
simulations for a design.
Thanks for your time.
Regards,
Greg

nakul · January 28, 2011, 03:10

Hi Greg,

I am interested. Could you provide some details as to what sort of expertise you are looking for, what needs to be done, type of work and its details.

mvoss · January 28, 2011, 03:24

hi,

so am i. Please specify your desired physics a bit more.

neewbie

gkretro · January 28, 2011, 12:09

Hello.
What I am looking for ,is to simulate the mixing of fuel/oxdizer
in a coaxial injector.To determine a stable flow regimes.
I have considerable data on the subject but no conclusive dimensional
numbers .
Thank you for your time .
Greg

nakul · January 28, 2011, 12:19

Hi,

Do you want to simulate the injector or combustor?

Please tell some more details regarding the nature of the project!

gkretro · January 28, 2011, 12:24

Hello,
Just the injector for now,The end result we are looking for is to define
the limits of the stable flow region,without exposing hardware to
dangerous unstable conditions.

Regards,
Greg

gkretro · February 2, 2011, 15:41

Well i found uploading a huge pdf files to the forum is out of the question,
So i guess i need to ask what specific information is needed to model the
the coaxial injector?

Bernhard · February 3, 2011, 02:36

Are you looking for a volunteer, or do you have something to offer? Is it a job vacancy, free lance work? I'm not sure this is best place to look for it, but if you keep everything vague, nobody will seriously respond.

akidess · February 3, 2011, 03:38

Quote:

Originally Posted by gkretro

Well i found uploading a huge pdf files to the forum is out of the question,

Then upload it to google docs, ge.tt or any other file hosting service.

gkretro · February 3, 2011, 12:18

Hello,
I am Looking for some help programming.
I am sorry to be cryptic in some of my responses but as some
might realize there are itar concerns,so i am staying strictly with
public domain sourced information.
I am asking those with the knowledge of open foam,what data
I would need to supply to complete a stability simulation of the
coaxial injector.

You can see the basics at:
http://www.greendesignbriefs.com/com...t/article/7825

The inner orifice will carry gaseous oxygen at 4000psi and the
outer orifice will carry liquid methanol at 4000psi

Regards,
Greg

January 27, 2011, 15:27	open foam programmer	#1
gkretro New Member Greg Join Date: Jan 2011 Posts: 5 Rep Power: 15	Hello, I am looking for an expert on open foam to run flow simulations and thermal simulations for a design. Thanks for your time. Regards, Greg

January 28, 2011, 12:09	problem	#4
gkretro New Member Greg Join Date: Jan 2011 Posts: 5 Rep Power: 15	Hello. What I am looking for ,is to simulate the mixing of fuel/oxdizer in a coaxial injector.To determine a stable flow regimes. I have considerable data on the subject but no conclusive dimensional numbers . Thank you for your time . Greg

January 28, 2011, 12:24	problem	#6
gkretro New Member Greg Join Date: Jan 2011 Posts: 5 Rep Power: 15	Hello, Just the injector for now,The end result we are looking for is to define the limits of the stable flow region,without exposing hardware to dangerous unstable conditions. Regards, Greg

February 2, 2011, 15:41	data	#7
gkretro New Member Greg Join Date: Jan 2011 Posts: 5 Rep Power: 15	Well i found uploading a huge pdf files to the forum is out of the question, So i guess i need to ask what specific information is needed to model the the coaxial injector?

February 3, 2011, 12:18	were from here?	#10
gkretro New Member Greg Join Date: Jan 2011 Posts: 5 Rep Power: 15	Hello, I am Looking for some help programming. I am sorry to be cryptic in some of my responses but as some might realize there are itar concerns,so i am staying strictly with public domain sourced information. I am asking those with the knowledge of open foam,what data I would need to supply to complete a stability simulation of the coaxial injector. You can see the basics at: http://www.greendesignbriefs.com/com...t/article/7825 The inner orifice will carry gaseous oxygen at 4000psi and the outer orifice will carry liquid methanol at 4000psi Regards, Greg

January 28, 2011, 03:10		#2
nakul Senior Member Nakul Join Date: Apr 2010 Location: India Posts: 147 Rep Power: 16	Hi Greg, I am interested. Could you provide some details as to what sort of expertise you are looking for, what needs to be done, type of work and its details.

January 28, 2011, 03:24		#3
mvoss Senior Member Matthias Voß Join Date: Mar 2009 Location: Berlin, Germany Posts: 449 Rep Power: 20	hi, so am i. Please specify your desired physics a bit more. neewbie

January 28, 2011, 12:19		#5
nakul Senior Member Nakul Join Date: Apr 2010 Location: India Posts: 147 Rep Power: 16	Hi, Do you want to simulate the injector or combustor? Please tell some more details regarding the nature of the project!

February 3, 2011, 02:36		#8
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 21	Are you looking for a volunteer, or do you have something to offer? Is it a job vacancy, free lance work? I'm not sure this is best place to look for it, but if you keep everything vague, nobody will seriously respond.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11
[Gmsh] Import problem	ARC	OpenFOAM Meshing & Mesh Conversion	0	February 27, 2010 10:56
Problem installing on Ubuntu 9.10 -> 'Cannot open : No such file or directory'	mfiandor	OpenFOAM Installation	2	January 25, 2010 09:50
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00
[Gmsh] Import gmsh msh to Foam	adorean	OpenFOAM Meshing & Mesh Conversion	24	April 27, 2005 08:19