chtmultiregionFoam - Gradient at Coupling boundary

FekrKon · February 17, 2011, 08:39

Dear Friends,
I was wondering if it is possible to have a gradient boundary condition in the interface boundary at the same time with coupling boundary condition.

I aim to have a coupling boundary between solid and fluid and at the same time it should be a heat source in the interface boundary. I checked almost all related thread and also

http://www.cfd-online.com/Forums/ope...egionfoam.html

which is mostly to add heat source in the solver rather than on the boundary.

I was also thinking to have one side (fluid part) coupling:solidWallMixedTemperatureCoupling and the other side (solid part) fixedGradient: solidWallHeatFluxTemperature , but it didn't work.
I appreciate if you help me in this issue.

mm.abdollahzadeh · April 2, 2012, 11:50

today i tried to test a case with chtMultiregionFoam.
my case includes natural convection in an enclosure with a block at the bottom. the bottom surface of block was heated.
the strange thing is that the temperature is not passing throgh solid zone to fluid zone. I am using turbulentTemperatureCoupledBaffleMixed as the boundary condition on the interface of soid and liquid zone.
I thinck there should be sth related to boundary condition. I will be too much thankful to recive you oponions

.

February 17, 2011, 08:39	chtmultiregionFoam - Gradient at Coupling boundary	#1
FekrKon New Member alireza j Join Date: Sep 2010 Posts: 3 Rep Power: 15	Dear Friends, I was wondering if it is possible to have a gradient boundary condition in the interface boundary at the same time with coupling boundary condition. I aim to have a coupling boundary between solid and fluid and at the same time it should be a heat source in the interface boundary. I checked almost all related thread and also http://www.cfd-online.com/Forums/ope...egionfoam.html which is mostly to add heat source in the solver rather than on the boundary. I was also thinking to have one side (fluid part) coupling:solidWallMixedTemperatureCoupling and the other side (solid part) fixedGradient: solidWallHeatFluxTemperature , but it didn't work. I appreciate if you help me in this issue.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX does not continue	Shafiul	CFX	10	February 17, 2011 07:57
External Radiation Boundary Condition (Two sided wall), Grid Interface	CFD XUE	FLUENT	0	July 8, 2010 06:49
temperature normal gradient on a boundary	Sandrine	Main CFD Forum	2	June 10, 2009 16:34
normal temperature gradient on a boundary	Sandrine	FLUENT	0	June 10, 2009 12:29
Boundary condition vector field gradient from two sides of patch face	quba	OpenFOAM	0	December 12, 2007 05:26

April 2, 2012, 11:50		#2
mm.abdollahzadeh Senior Member mahdi abdollahzadeh Join Date: Mar 2011 Location: Covilha,Portugal Posts: 153 Rep Power: 15	today i tried to test a case with chtMultiregionFoam. my case includes natural convection in an enclosure with a block at the bottom. the bottom surface of block was heated. the strange thing is that the temperature is not passing throgh solid zone to fluid zone. I am using turbulentTemperatureCoupledBaffleMixed as the boundary condition on the interface of soid and liquid zone. I thinck there should be sth related to boundary condition. I will be too much thankful to recive you oponions .