|
[Sponsors] |
February 24, 2011, 05:32 |
Problem with Specifying Boundary Conditions
|
#1 |
Senior Member
Nakul
Join Date: Apr 2010
Location: India
Posts: 147
Rep Power: 16 |
Hi,
I have supersonic flow over a flat plate at M=3.75. The freestream conditions are given as total pressure =1.2MPa and Total Temperature being 299K leading to a static temperature of 77K. I am using JANAF thermo data but with the lower temperature limit of 200K, I am not being able to specify the boundary condition for T at inlet (T=77K). I am using OF-1.7.1 and fluid is oxygen. I have to use JANAF data because there is normal injection of N2 downstream. Any help would be greatly appreciated. The details of the case can be found in the following link on pg 6 and 7. http://procom.kaist.ac.kr/download/ijp/72.pdf |
|
February 25, 2011, 07:13 |
|
#2 |
Senior Member
Nakul
Join Date: Apr 2010
Location: India
Posts: 147
Rep Power: 16 |
Hi,
Can anybody help with this in some way? I still haven't been able to solve this problem. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
CG, BICGSTAB(2) : problem with matrix operation and boundary conditions | moomba | Main CFD Forum | 2 | February 17, 2010 03:37 |
Fluent accuracy and boundary conditions | Paolo Lampitella | FLUENT | 0 | June 12, 2008 06:25 |
Problem with Boundary conditions | Mahiboobswamulu | Main CFD Forum | 10 | August 26, 2003 13:24 |
boundary conditions problem | reinaldo kuhn | Phoenics | 1 | March 27, 2003 11:46 |