simpleSRFFoam in OpenFOAM 1.5-Dev

kurne · March 18, 2011, 06:07

Dear All
I have install OpenFOAM 1.5-Dev as per instruction given here
http://openfoamwiki.net/index.php/Installation
But the problem is that i am not getting any tutorials file and i want to use simpleSRFFoam and MRFsimpleFoam but how to use it.I want to ask that after installation where the all files are installed and how to use simpleSRFFoam and MRFsimpleFoam for my case.

wyldckat · March 18, 2011, 15:22

Greetings Kurne,

Run this to install the files necessary for building the version you installed:

Code:

sudo apt-get install openfoam-dev-1.5-dev

Now check if the tutorials are where they should be:

Code:

echo $FOAM_TUTORIALS
ls -l $FOAM_TUTORIALS

If it's all OK, do the standard steps:

Code:

mkdir -p $FOAM_RUN
cp -r $FOAM_TUTORIALS $FOAM_RUN

Best regards and good luck!
Bruno

kurne · March 18, 2011, 22:28

Dear Bruno
Thanks a lot Bruno.You are really a Rocking guy in OpenFOAM.I have been stuck up with this from couple of days.I have solved my problem with the help of you.
Thanking You Once Again.
Take Care.

March 18, 2011, 06:07	simpleSRFFoam in OpenFOAM 1.5-Dev	#1
kurne Member Kurne Join Date: Aug 2010 Location: Pune, INDIA Posts: 88 Rep Power: 15	Dear All I have install OpenFOAM 1.5-Dev as per instruction given here http://openfoamwiki.net/index.php/Installation But the problem is that i am not getting any tutorials file and i want to use simpleSRFFoam and MRFsimpleFoam but how to use it.I want to ask that after installation where the all files are installed and how to use simpleSRFFoam and MRFsimpleFoam for my case. __________________ Simulation Is Determination Of Imagination Towards Approximation ® Best Regards Mubeen K Kurne

March 18, 2011, 15:22		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Kurne, Run this to install the files necessary for building the version you installed: Code: sudo apt-get install openfoam-dev-1.5-dev Now check if the tutorials are where they should be: Code: echo $FOAM_TUTORIALS ls -l $FOAM_TUTORIALS If it's all OK, do the standard steps: Code: mkdir -p $FOAM_RUN cp -r $FOAM_TUTORIALS $FOAM_RUN Best regards and good luck! Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

March 18, 2011, 22:28		#3
kurne Member Kurne Join Date: Aug 2010 Location: Pune, INDIA Posts: 88 Rep Power: 15	Dear Bruno Thanks a lot Bruno.You are really a Rocking guy in OpenFOAM.I have been stuck up with this from couple of days.I have solved my problem with the help of you. Thanking You Once Again. Take Care. __________________ Simulation Is Determination Of Imagination Towards Approximation ® Best Regards Mubeen K Kurne

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] ParaFoam instalation in OpenFoam 1.5 dev	titio	ParaView	2	July 24, 2010 23:24
OpenFOAM 1.5 dev	LVDH	OpenFOAM	98	May 5, 2010 17:01
[OpenFOAM] ParaView/ParaFoam in OpenFoam 1.5 dev	titio	ParaView	2	February 27, 2010 14:02
[OpenFOAM] Paraview/Parafoam in OpenFoam 1.5 dev	titio	ParaView	0	December 9, 2009 12:13
[OpenFOAM] Paraview/Parafoam in OpenFoam 1.5 dev	titio	ParaView	0	December 9, 2009 12:12