simpleSRFFoam error in OpenFOAM 1.5-dev
 

Dear All
I have installed OpenFOAM 1.5-dev and i have given run under simpleSRFFoam solver but i am getting the strange error after running it.Will somebody help me in solving this error.The error is as follows

/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.5-dev |
| \\ / A nd | Revision: exported |
| \\/ M anipulation | Web: http://www.OpenFOAM.org |
\*---------------------------------------------------------------------------*/
Exec : simpleSRFFoam
Date : Mar 21 2011
Time : 10:23:54
Host : ubuntu
PID : 2887
Case : /home/sameer/Bl65340/OF1.5dev/2
nProcs : 1

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Reading field p



Attempt to cast type patch to type lduInterface

From function refCast<To>(From&)
in file /build/buildd/openfoam-dev-1.5-1726/OpenFOAM-1.5-dev/src/OpenFOAM/lnInclude/typeInfo.H at line 106.

FOAM aborting

Aborted


I am facing such type of error first time.I am waiting for help.Thanks in Advance

I have similiar experience before, and it is the problem of boundary condition. Check your boundary condition carefully.

Dear Wei Zhao
I have check my boundary conditions many times but still i am facing the same problem.Will you please elaborate the term "Checking the boundary conditions carefully".
Thanks In Advance.

The boundary condition is not only in your "boundary" file. If you run checkMesh and the result is ok, then your boundary file is fine. I think you might need to check your initial condition in 0 folder, especially the p file. Have you run the tutorials for simpleSRFFoam? Is this solver compiled well?

Good luck!

Dear Wei Zhao

Yes i have compile the solver and it is running in the tutorial case.I am also implementing the similar type of problem and i have run in the OpenFOAM 1.7.1 but the problem is only in OpenFOAM 1.5-Dev.

I am still facing the same problem after observing the my initial conditions file and the MESH is ok.

Can Anybody help.

Thanks in advance.

Dear Wei Zhao

I got the solution.Thanks a lot for the help.