solver

venkataramana · June 17, 2011, 05:00

dear Foamers,

which solver is suitable for the following application:

The flow and heat transfer problem of a fluid film over an unsteady stretching sheet is
considered. The fluid is incompressible

thanks in advance.

Tushar@cfd · June 17, 2011, 05:17

For the above mentioned problem, bouyantBoussinesqPisoFoam suits best. It's quite simple and fits in your requirements.

_______
Regards,

venkataramana · June 17, 2011, 06:47

hi tushar,
where the above solver is located, i am unable to find it , but i found bouyantBoussinesqsimpleFoam under heat transfer folder.

thanks for reply.

venkataramana · June 17, 2011, 07:03

hi Foamers,

here i am defining the problem, which solver suits for the following problem:

An analysis is made of the temperature distribution and velocity in
the flow of a viscous incompressible fluid caused by
the stretching of a sheet which issues from a slit in to
the fluid.
Due to entrainment of the ambient
fluid, this boundary layer is different from that in the Blasius
flow past a flat plate.

Regards,
Venkat.

Tushar@cfd · June 17, 2011, 07:11

I don't know which version of OpenFoam you are using. Anyways, "OpenFoam_1.6" has this solver. I am attaching those files with this thread for your further progress.

buoyantBoussinesqPisoFoam.zip

buoyantBoussinesqPisoFoam_tut.zip

venkataramana · June 17, 2011, 07:19

i am using opefoam 1.71 version

Tushar@cfd · June 17, 2011, 23:44

It's ok, just use those files in OpenFoam 1.7.1, it will work all fine...
cya

venkataramana · June 18, 2011, 00:33

hi Tushar,
thanks for your reply,
in this problem the sheet (flat plate) also moving with some velocity, so that the boundary layer is different from that of fixed flat plate, how it is similar to hot room problem.

Tushar@cfd · June 18, 2011, 12:42

Can you send me your case I will sort out your problem.

venkataramana · June 18, 2011, 22:24

Here I am attaching the physical model,

Screenshot-8.jpg

Tushar@cfd · June 19, 2011, 01:02

Just change the BCs, it will work.. anyways I would have admire if you would have provided me the case files. I mean I could have done the changes and could have emailed you..

June 17, 2011, 05:00	solver	#1
venkataramana Member venkat Join Date: Mar 2011 Location: Bangalore,india Posts: 47 Rep Power: 15	dear Foamers, which solver is suitable for the following application: The flow and heat transfer problem of a fluid film over an unsteady stretching sheet is considered. The fluid is incompressible thanks in advance.

June 17, 2011, 05:17	Hello Venkat,	#2
Tushar@cfd Senior Member T. Chourushi Join Date: Jul 2009 Posts: 321 Blog Entries: 1 Rep Power: 17	For the above mentioned problem, bouyantBoussinesqPisoFoam suits best. It's quite simple and fits in your requirements. _______ Regards, Last edited by Tushar@cfd; June 17, 2011 at 06:26.

June 17, 2011, 07:11	Hello Venkat,	#5
Tushar@cfd Senior Member T. Chourushi Join Date: Jul 2009 Posts: 321 Blog Entries: 1 Rep Power: 17	I don't know which version of OpenFoam you are using. Anyways, "OpenFoam_1.6" has this solver. I am attaching those files with this thread for your further progress. buoyantBoussinesqPisoFoam.zip buoyantBoussinesqPisoFoam_tut.zip

June 17, 2011, 23:44	Hi venkat,	#7
Tushar@cfd Senior Member T. Chourushi Join Date: Jul 2009 Posts: 321 Blog Entries: 1 Rep Power: 17	It's ok, just use those files in OpenFoam 1.7.1, it will work all fine... cya

June 18, 2011, 12:42	Hi venkat,	#9
Tushar@cfd Senior Member T. Chourushi Join Date: Jul 2009 Posts: 321 Blog Entries: 1 Rep Power: 17	Can you send me your case I will sort out your problem.

June 17, 2011, 06:47		#3
venkataramana Member venkat Join Date: Mar 2011 Location: Bangalore,india Posts: 47 Rep Power: 15	hi tushar, where the above solver is located, i am unable to find it , but i found bouyantBoussinesqsimpleFoam under heat transfer folder. thanks for reply.

June 17, 2011, 07:03		#4
venkataramana Member venkat Join Date: Mar 2011 Location: Bangalore,india Posts: 47 Rep Power: 15	hi Foamers, here i am defining the problem, which solver suits for the following problem: An analysis is made of the temperature distribution and velocity in the flow of a viscous incompressible fluid caused by the stretching of a sheet which issues from a slit in to the fluid. Due to entrainment of the ambient fluid, this boundary layer is different from that in the Blasius flow past a flat plate. Regards, Venkat.

June 17, 2011, 07:19		#6
venkataramana Member venkat Join Date: Mar 2011 Location: Bangalore,india Posts: 47 Rep Power: 15	i am using opefoam 1.71 version

June 18, 2011, 00:33		#8
venkataramana Member venkat Join Date: Mar 2011 Location: Bangalore,india Posts: 47 Rep Power: 15	hi Tushar, thanks for your reply, in this problem the sheet (flat plate) also moving with some velocity, so that the boundary layer is different from that of fixed flat plate, how it is similar to hot room problem.

June 18, 2011, 22:24	hi Tushar	#10
venkataramana Member venkat Join Date: Mar 2011 Location: Bangalore,india Posts: 47 Rep Power: 15	Here I am attaching the physical model, Screenshot-8.jpg

June 19, 2011, 01:02	Hi venkat,	#11
Tushar@cfd Senior Member T. Chourushi Join Date: Jul 2009 Posts: 321 Blog Entries: 1 Rep Power: 17	Just change the BCs, it will work.. anyways I would have admire if you would have provided me the case files. I mean I could have done the changes and could have emailed you..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A New Solver for Supersonic Combustion	nakul	OpenFOAM Announcements from Other Sources	19	February 27, 2024 09:44
[Other] A New Solver for Supersonic Combustion	nakul	OpenFOAM Community Contributions	20	February 22, 2019 09:08
thobois class engineTopoChangerMesh error	Peter_600	OpenFOAM	4	August 2, 2014 09:52
Development of a Low mach PISO solver	nishant_hull	OpenFOAM Programming & Development	0	August 25, 2009 12:48
why the solver reject it? Anyone with experience?	bearcat	CFX	6	April 28, 2008 14:08