errors with flux scheme

venkataramana · July 7, 2011, 05:15

hi Foamers,
here i am running a new scheme with rhoCentralFoam, no compilation errors but the following errors occurring during execution can anybody rectify the following errors:

Create time

Create mesh for time = 0

Reading thermophysical properties

Selecting thermodynamics package ePsiThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>>
Reading field U

Reading thermophysicalProperties

fluxScheme: newScheme

Starting time loop

#0 Foam::error:

rintStack(Foam::Ostream&) in "/opt/openfoam171/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::sigSegv::sigSegvHandler(int) in "/opt/openfoam171/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Uninterpreted:
#3
in "/root/OpenFOAM/root-1.7.1/applications/bin/linuxGccDPOpt/newSolver"
#4
in "/root/OpenFOAM/root-1.7.1/applications/bin/linuxGccDPOpt/newSolver"
#5 __libc_start_main in "/lib/libc.so.6"
#6
in "/root/OpenFOAM/root-1.7.1/applications/bin/linuxGccDPOpt/newSolver"
Segmentation fault

thanks in advance,
venkat.

nimasam · July 7, 2011, 13:06

Segmentation fault
look for , is there any place divide by zero?

nsreddysrsit · July 8, 2011, 00:55

look for which folder like 0 or somewhere else

Tushar@cfd · July 8, 2011, 06:45

Try to put different Boundary conditions, and check the solution... The error arises when the variables reach a situation of divide by zero number or NAN.

July 7, 2011, 05:15	errors with flux scheme	#1
venkataramana Member venkat Join Date: Mar 2011 Location: Bangalore,india Posts: 47 Rep Power: 15	hi Foamers, here i am running a new scheme with rhoCentralFoam, no compilation errors but the following errors occurring during execution can anybody rectify the following errors: Create time Create mesh for time = 0 Reading thermophysical properties Selecting thermodynamics package ePsiThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>> Reading field U Reading thermophysicalProperties fluxScheme: newScheme Starting time loop #0 Foam::error:rintStack(Foam::Ostream&) in "/opt/openfoam171/lib/linuxGccDPOpt/libOpenFOAM.so" #1 Foam::sigSegv::sigSegvHandler(int) in "/opt/openfoam171/lib/linuxGccDPOpt/libOpenFOAM.so" #2 Uninterpreted: #3 in "/root/OpenFOAM/root-1.7.1/applications/bin/linuxGccDPOpt/newSolver" #4 in "/root/OpenFOAM/root-1.7.1/applications/bin/linuxGccDPOpt/newSolver" #5 __libc_start_main in "/lib/libc.so.6" #6 in "/root/OpenFOAM/root-1.7.1/applications/bin/linuxGccDPOpt/newSolver" Segmentation fault thanks in advance, venkat.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Building OpenFOAM1.7.0 from source	ata	OpenFOAM Installation	46	March 6, 2022 14:21
How to write k and epsilon before the abnormal end	xiuying	OpenFOAM Running, Solving & CFD	8	August 27, 2013 16:33
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 15:09
IcoFoam parallel woes	msrinath80	OpenFOAM Running, Solving & CFD	9	July 22, 2007 03:58
Could anybody help me see this error and give help	liugx212	OpenFOAM Running, Solving & CFD	3	January 4, 2006 19:07

July 7, 2011, 13:06		#2
nimasam Senior Member Nima Samkhaniani Join Date: Sep 2009 Location: Tehran, Iran Posts: 1,267 Blog Entries: 1 Rep Power: 25	Segmentation fault look for , is there any place divide by zero?

July 8, 2011, 00:55	hi	#3
nsreddysrsit Member nsreddy Join Date: Sep 2010 Posts: 40 Rep Power: 16	look for which folder like 0 or somewhere else Last edited by nsreddysrsit; July 8, 2011 at 01:15.

July 8, 2011, 06:45		#4
Tushar@cfd Senior Member T. Chourushi Join Date: Jul 2009 Posts: 321 Blog Entries: 1 Rep Power: 18	Try to put different Boundary conditions, and check the solution... The error arises when the variables reach a situation of divide by zero number or NAN.