|
[Sponsors] |
October 2, 2011, 17:48 |
How can i solve orifice flow with OpenFOAM?
|
#1 |
Member
Join Date: Aug 2009
Posts: 67
Rep Power: 16 |
Hi guys,
I' d like to solve a simple orifice 2D geometry with OpenFoam. The boundary conditions that i will use are pressure inlet and outlet and wall. The geometry and the mesh are prepared by Gambit that will be imported to OpenFOAM. The working gas is argon. I will use DSMC method to solve this flow. There are four available tutorials about DSMC that will help me how to use this solver. In order to determine the boundary conditions and the gas properties what are the most useful tutorials? Could you help me to solve it? Thanks a lot, spk |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to solve a problem involving both laminar and turbulent flow | seefd | FLUENT | 1 | June 3, 2011 03:20 |
Cross-compiling OpenFOAM 1.7.0 on Linux for Windows 32 and 64bits with Mingw-w64 | wyldckat | OpenFOAM Announcements from Other Sources | 3 | September 8, 2010 06:25 |
Flow past orifice | aurel | Main CFD Forum | 0 | January 27, 2009 06:46 |
solve the compressible flow in microchannel? | sandernagoo | Main CFD Forum | 10 | July 29, 2002 09:22 |
Inviscid Drag at subsonic, subcritical Mach # | Axel Rohde | Main CFD Forum | 1 | November 19, 2001 12:19 |