|
[Sponsors] |
February 29, 2012, 13:13 |
.dep file does not show all reference files
|
#1 |
Member
Paulo Bufacchi
Join Date: Jun 2010
Posts: 50
Rep Power: 15 |
Hi Foamers,
I just realized that not all files used by a solver during a case solution are in the solver's .dep file. Being specific, in fireFoam solver, the fireFoam.dep file does not mention ODESolidChemistryModel (.H and .C) for example. What is the reason for that? Shouldn't all files used by the solver be referenced in the .dep file? Thanks, Paulo |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] mesh airfoil NACA0012 | anand_30 | OpenFOAM Meshing & Mesh Conversion | 13 | March 7, 2022 17:22 |
Second Derivative Zero - Boundary Condition | fu-ki-pa | OpenFOAM | 11 | March 27, 2021 04:28 |
critical error during installation of openfoam | Fabio88 | OpenFOAM Installation | 21 | June 2, 2010 03:01 |
G95 + CGNS | Bruno | Main CFD Forum | 1 | January 30, 2007 00:34 |
Results saving in CFD | hawk | Main CFD Forum | 16 | July 21, 2005 20:51 |