[snappyHexMesh] snappyhexmesh user guide

hei@ge · March 7, 2012, 01:59

I am now learning snappyhexmesh ,but there are little paper to study.and i see the user guide ,but i can not download.If you have it,please give it to me .Thanks a lot.My e-mail is zhangdesheng0068@126.com.

anon_a · March 7, 2012, 03:37

The user guide can be downloaded in pdf from
http://www.openfoam.org/docs/

There are several posts in the forum concerning snappyHexMesh, just use the search function first. You can also try some tutorials, such as the following in version 2.0.1
$FOAM_TUTORIALS/multiphase/LTSInterFoam/wigleyHull
$FOAM_TUTORIALS/multiphase/interPhaseChangeFoam/cavitatingBullet
$FOAM_TUTORIALS/heatTransfer/buoyantBoussinesqSimpleFoam/iglooWithFridges
$FOAM_TUTORIALS/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater
$FOAM_TUTORIALS/mesh/snappyHexMesh/flange
$FOAM_TUTORIALS/incompressible/windSimpleFoam/turbineSiting
$FOAM_TUTORIALS/incompressible/simpleFoam/motorBike
$FOAM_TUTORIALS/incompressible/pimpleDyMFoam/wingMotion/wingMotion_snappyHexMesh

hei@ge · March 7, 2012, 05:04

Thanks a lot .anon_a,I have another question:after conduct snappyhexmesh,i should conduct the solver in which time .Tank you very much.

anon_a · March 7, 2012, 05:11

If I understand correctly, you are wondering about the startTime that you must use after running sHM, because it produces several time directories. In fact, these directories contain the mesh in different stages.

I can think of the following two options: You may use "latestTime" in controlDict so that it uses the most complete version of the mesh (the last time directory). Or, you can call sHM with "snappyHexMesh -overwrite" so that the mesh is overwritten and you only have the initial conditions directory. In the latter case, you can use "startTime" in controlDict, as always.

I always choose the second option to avoid confusion, unless I only want to check the differences between various grid stages.

hei@ge · March 7, 2012, 05:23

You understand my question very correctly.If i choose the first opioion,i think i should copy some folder to the latest time folder.right?this folder should contain 0 folder.I hope you can give my fault.Thanks a lot.

hei@ge · March 7, 2012, 05:34

I understand it .Thank you very much.thanks.

March 7, 2012, 01:59	snappyhexmesh user guide	#1
hei@ge Member 张德胜 Join Date: Oct 2011 Posts: 71 Rep Power: 14	I am now learning snappyhexmesh ,but there are little paper to study.and i see the user guide ,but i can not download.If you have it,please give it to me .Thanks a lot.My e-mail is zhangdesheng0068@126.com.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Incorrect utility names in User Guide	schoon	OpenFOAM Bugs	1	October 23, 2008 11:32
CFX User Guide query	siw	CFX	0	August 21, 2008 03:15
[blockMesh] BlockMesh documentation User Guide clearance of mergePatchPairs proposals	benru	OpenFOAM Meshing & Mesh Conversion	0	June 9, 2008 02:22
Ist it only me that cant read the user guide pdf	olle53	OpenFOAM	5	April 5, 2006 22:14
Fluent 5.5. What the differences with fluent 5.3??	confused	FLUENT	2	July 29, 2001 21:58

March 7, 2012, 03:37		#2
anon_a Disabled Join Date: Mar 2011 Posts: 174 Rep Power: 15	The user guide can be downloaded in pdf from http://www.openfoam.org/docs/ There are several posts in the forum concerning snappyHexMesh, just use the search function first. You can also try some tutorials, such as the following in version 2.0.1 $FOAM_TUTORIALS/multiphase/LTSInterFoam/wigleyHull $FOAM_TUTORIALS/multiphase/interPhaseChangeFoam/cavitatingBullet $FOAM_TUTORIALS/heatTransfer/buoyantBoussinesqSimpleFoam/iglooWithFridges $FOAM_TUTORIALS/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater $FOAM_TUTORIALS/mesh/snappyHexMesh/flange $FOAM_TUTORIALS/incompressible/windSimpleFoam/turbineSiting $FOAM_TUTORIALS/incompressible/simpleFoam/motorBike $FOAM_TUTORIALS/incompressible/pimpleDyMFoam/wingMotion/wingMotion_snappyHexMesh

March 7, 2012, 05:04		#3
hei@ge Member 张德胜 Join Date: Oct 2011 Posts: 71 Rep Power: 14	Thanks a lot .anon_a,I have another question:after conduct snappyhexmesh,i should conduct the solver in which time .Tank you very much.

March 7, 2012, 05:11		#4
anon_a Disabled Join Date: Mar 2011 Posts: 174 Rep Power: 15	If I understand correctly, you are wondering about the startTime that you must use after running sHM, because it produces several time directories. In fact, these directories contain the mesh in different stages. I can think of the following two options: You may use "latestTime" in controlDict so that it uses the most complete version of the mesh (the last time directory). Or, you can call sHM with "snappyHexMesh -overwrite" so that the mesh is overwritten and you only have the initial conditions directory. In the latter case, you can use "startTime" in controlDict, as always. I always choose the second option to avoid confusion, unless I only want to check the differences between various grid stages.

March 7, 2012, 05:23		#5
hei@ge Member 张德胜 Join Date: Oct 2011 Posts: 71 Rep Power: 14	You understand my question very correctly.If i choose the first opioion,i think i should copy some folder to the latest time folder.right?this folder should contain 0 folder.I hope you can give my fault.Thanks a lot.

March 7, 2012, 05:34		#6
hei@ge Member 张德胜 Join Date: Oct 2011 Posts: 71 Rep Power: 14	I understand it .Thank you very much.thanks.