CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM (
-   -   A question of AMI+interDyMFoam (

liping_he April 9, 2012 05:21

A question of AMI+interDyMFoam
I creat a case using interDyMFoam solver, and I used the AMI boundary to simulate the running of a rotor. At the same time liquid jets towards to rotor. But the case is not shows:


Selecting dynamicFvMesh solidBodyMotionFvMesh

Selecting solid-body motion function rotatingMotion
Applying solid body motion to cellZone rotor
#0 Foam::error::printStack(Foam::Ostream&) in "/home/cfd/OpenFOAM/OpenFOAM-2.1.0/platforms/linuxGccDPOpt/lib/"
#1 Foam::sigSegv::sigHandler(int) in "/home/cfd/OpenFOAM/OpenFOAM-2.1.0/platforms/linuxGccDPOpt/lib/"
#2 Uninterpreted:
#3 Foam::solidBodyMotionFvMesh::solidBodyMotionFvMesh (Foam::IOobject const&) in "/home/cfd/OpenFOAM/OpenFOAM-2.1.0/platforms/linuxGccDPOpt/lib/"
#4 Foam::dynamicFvMesh::addIOobjectConstructorToTable <Foam::solidBodyMotionFvMesh>::New(Foam::IOobjec t const&) in "/home/cfd/OpenFOAM/OpenFOAM-2.1.0/platforms/linuxGccDPOpt/lib/"
#5 Foam::dynamicFvMesh::New(Foam::IOobject const&) in "/home/cfd/OpenFOAM/OpenFOAM-2.1.0/platforms/linuxGccDPOpt/lib/"
in "/home/cfd/OpenFOAM/OpenFOAM-2.1.0/platforms/linuxGccDPOpt/bin/interDyMFoam"
#7 __libc_start_main in "/lib/tls/i686/cmov/"
in "/home/cfd/OpenFOAM/OpenFOAM-2.1.0/platforms/linuxGccDPOpt/bin/interDyMFoam"
Segmentation fault
my email address:

liping_he April 27, 2012 22:15

1 Attachment(s)
还一个可以上传附件 也可以试试
奋斗(274795506) 10:11:54
辰星點點<> 10:12:09

vonboett July 2, 2012 07:55

Hi liping,
I got the same error simulating a rotating drum. I found it was using cellZone instead of cellSet in dynamicMeshDict. Dependent of the type you use creating your rotor for example with topoSet, the type has to fit between topoSetDict and dynamicMeshDict.

liping_he July 8, 2012 20:23

Hi Voboett

The error we got had been solved in the thread on the site


All times are GMT -4. The time now is 22:18.