OpenFOAM

Rating Thread / Thread Starter	Last Post	Replies	Views
Sticky: Getting Started with OpenFOAM ( 1 2) wyldckat	June 21, 2024 07:54 by Martin_Sz	26	55,027
Sticky: OpenFOAM.com versus OpenFOAM.org: Which version to use? wyldckat	March 25, 2023 08:50 by ancolli	19	70,155
Sticky: Map of the OpenFOAM Forum - Understanding where to post your questions! wyldckat	September 2, 2021 06:29 by hakosaj	10	22,973
Sticky: How to contribute to the community of OpenFOAM users and to the OpenFOAM technology wyldckat	November 10, 2017 16:54 by rdbisme	17	21,817
Sticky: How to give enough info to get help linnemann	September 20, 2017 10:19 by linnemann	8	58,578
Sticky: Wiki ( 1 2 3 ... Last Page) gschaider	December 31, 2014 08:34 by wyldckat	178	71,841
OpenFOAM 2.0.0 and Turbomachinery lindner	July 8, 2011 08:35 by lindner	0	2,453
SpalartAllmaras and BuoyantBoussinesq for heat Transfer Aerospace	July 8, 2011 08:18 by Aerospace	0	1,838
errors with flux scheme venkataramana	July 8, 2011 06:45 by Tushar@cfd	3	1,529
Reaction products display megacrout	July 8, 2011 06:19 by megacrout	7	1,938
What is meaning of compactNormalStress in the solidDisplacementFoam? liuhuafei	July 8, 2011 05:18 by liuhuafei	0	2,035
Plotting Residuals ata	July 8, 2011 03:50 by joel.lehikoinen	12	14,628
Setting the Velocity Field Adammann	July 8, 2011 03:15 by Bernhard	1	1,917
Coupling of DEM with Openfoam mali28	July 8, 2011 02:19 by flowman	2	3,671
rhoCentralFoam nsreddysrsit	July 8, 2011 00:47 by nsreddysrsit	0	1,960
gas flow through a pipe megacrout	July 7, 2011 15:47 by nsf	8	4,387
Interface location problem in interFoam cfd_user2011	July 7, 2011 13:04 by nimasam	1	1,486
firefoam windwin	July 7, 2011 07:21 by francescomarra	1	1,943
TVD scheme limitedLinear only first order accurate? Rickard.Solsjo	July 7, 2011 05:53 by Rickard.Solsjo	0	2,298
Previous version with git flowris	July 7, 2011 02:37 by flowris	3	2,183
How to read a mesh from a directory other than the default tutorial directory mali28	July 6, 2011 15:08 by nimasam	1	1,973
variable geometry turbine Peter_600	July 6, 2011 10:35 by Peter_600	0	1,433
gradScheme Calculation doubtsincfd	July 6, 2011 09:31 by kathrin_kissling	1	1,630
Surface Roughness Jochem	July 6, 2011 07:17 by Jochem	2	2,855
May I know more about tensor calculation? aki_yafuji	July 6, 2011 03:33 by kathrin_kissling	5	1,717
icoFoam vs simpleFoam lovecraft22	July 6, 2011 01:59 by lovecraft22	2	4,028
decomposePare error with parMetis tonyuprm	July 5, 2011 16:49 by tonyuprm	7	2,263
Cantera and OF 1.7.1 newOFuser	July 5, 2011 16:40 by newOFuser	0	1,371
Foam::sigFpe::sigFpeHandler(int) Error usergk	July 5, 2011 11:31 by usergk	5	2,989
OpenFOAM Axial Fan miteshgelani	July 5, 2011 09:53 by val46	1	4,656
Using solidBodyMotion for rigid body motion L1011	July 5, 2011 05:59 by OF_NACA	4	6,144
Heat transfer of liquids in a pipe Andrev	July 4, 2011 13:19 by Andrev	2	1,604
Manifold Absolute Pressure in Engine Simulations abminternet	July 4, 2011 12:45 by abminternet	4	2,538
low Reynolds Model for pipe flow RugbyGandalf	July 4, 2011 12:28 by RugbyGandalf	9	3,669
Mesh tetrahedral with firefoam 1.7 ntd	July 4, 2011 10:53 by ntd	0	2,147
Version 2.0.0 and Intel Compiler muxav	July 4, 2011 09:20 by Linse	1	1,750
decomposePar gives errors of_user_	July 4, 2011 06:27 by of_user_	1	3,775
Increasing Iter. number of GAMG in pimpleDyMFoam with GGI waku2005	July 3, 2011 21:21 by waku2005	0	1,892
any access to update mass injected in InjecteModel? alundilong	July 3, 2011 17:47 by alundilong	1	1,631
blockMesh and surface mesh doubtsincfd	July 3, 2011 02:26 by AlanR	1	2,157
Boundary condition problems Rose2011	July 1, 2011 13:00 by Rose2011	2	2,696
buoyantBoussinesqPisoFoam windwin	July 1, 2011 06:43 by al_pr	1	1,396
Bifurcation explode at intersection liguifan	July 1, 2011 05:34 by lovecraft22	15	1,873
buoyantSimpleFoam with inflow and ouflow. masb	July 1, 2011 04:28 by olhe0002	7	2,286
U.correctBoundaryConditions() ata	July 1, 2011 03:55 by ata	2	5,434
Placing second fluid in OpenFOAM. vivek070176	June 30, 2011 19:33 by wouter	5	1,665

Read this first: How to ask a question on the forums

Page 169 of 245

169

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 15:24.