OpenFOAM

Rating Thread / Thread Starter	Last Post	Replies	Views
Sticky: OpenFOAM.com versus OpenFOAM.org: Which version to use? wyldckat	March 25, 2023 07:50 by ancolli	19	58,728
Sticky: Getting Started with OpenFOAM ( 1 2) wyldckat	August 14, 2022 13:55 by mikethe1wheelnut	25	50,281
Sticky: Map of the OpenFOAM Forum - Understanding where to post your questions! wyldckat	September 2, 2021 05:29 by hakosaj	10	21,448
Sticky: How to contribute to the community of OpenFOAM users and to the OpenFOAM technology wyldckat	November 10, 2017 15:54 by rdbisme	17	20,189
Sticky: How to give enough info to get help linnemann	September 20, 2017 09:19 by linnemann	8	55,128
Sticky: Wiki ( 1 2 3 ... Last Page) gschaider	December 31, 2014 07:34 by wyldckat	178	67,265
How to get reference to k and epsilon in the epsEqn and kEqn cfd_explorer	March 10, 2011 09:58 by cfd_explorer	0	2,232
How to create a new boundary condition? msarkar	March 10, 2011 04:48 by msarkar	0	1,670
Need some details in SimpleFOAM vishal	March 10, 2011 04:15 by vishal	4	2,106
mhdFoam goodkid	March 9, 2011 10:09 by OldKid	3	2,304
A new problem about cantera NewKid	March 9, 2011 07:15 by NewKid	1	1,250
How to install Sundials on OF 1.5-dev? NewKid	March 9, 2011 07:13 by NewKid	2	1,539
How to give out U in ratio to inflow-velocity RugbyGandalf	March 9, 2011 04:16 by RugbyGandalf	4	1,277
Always crash when solve a C-D nozzle flow field using rhoCentralFoam hawklion	March 8, 2011 19:03 by hawklion	3	1,583
okay, the Womersley solution validation nobound	March 8, 2011 12:09 by nobound	2	1,891
Concentration enhancement (Lid-driven cavity) executor	March 8, 2011 06:17 by executor	0	1,088
A beginner question walk_and_see	March 8, 2011 03:58 by gwierink	3	1,601
fluent3DToFoam check mesh error djstoneage	March 8, 2011 02:04 by djstoneage	0	1,588
Wall correction for the temperature gradient Hagen	March 7, 2011 20:04 by Hagen	0	2,142
Partitioning problem with interDyMFoam DLC	March 7, 2011 17:28 by DLC	0	1,737
Defining additionally variables of U in OF 1.6 lentschi	March 7, 2011 09:10 by gwierink	3	1,844
y+ calculation (for no wall function walls) (and its BC) maysmech	March 7, 2011 09:01 by maysmech	10	3,468
Cumulative continuity error large in parallel simulations xiao	March 7, 2011 04:13 by iznal	3	4,444
forces: What are magUInf, lRef, Aref? klausb	March 6, 2011 15:58 by GregorS	1	9,680
[Thank you for help] How comes this modified lapalacianFoam can not be 'wmake'? merlyn	March 6, 2011 15:17 by merlyn	4	1,859
interTrackFoam for rising bubble michielm	March 6, 2011 12:27 by gwierink	3	2,635
ParaFoam, blockMesh etc in vnc SimonH.	March 6, 2011 11:27 by waku2005	1	2,286
Calculator after GroupDatasets doesn't work Hunky	March 5, 2011 11:49 by Hunky	0	1,217
Look for mass fraction Argen	March 5, 2011 07:05 by Rickard.Solsjo	1	1,117
[Thank you for Help] Error occurred when I used wmake merlyn	March 4, 2011 19:56 by merlyn	2	2,245
calculated velocity profile as new wall boundary wouter	March 4, 2011 18:55 by wouter	0	1,444
LES with OpenFOAM samiam1000	March 4, 2011 10:19 by francescomarra	1	2,254
problem when I import mesh with cyclic graduated BC Cyp	March 3, 2011 10:38 by Cyp	0	1,281
Boundary condition for bifurcated flow jiejie	March 3, 2011 10:35 by jose_rodrig	12	5,140
waveBC + pb with "libBoundaryConditions.so" FLOAT	March 3, 2011 09:05 by FLOAT	0	1,430
turbinSiting - disk area snippsnuske	March 3, 2011 07:33 by snippsnuske	0	1,106
wind turbine, actuationDisk snippsnuske	March 3, 2011 07:16 by snippsnuske	1	2,448
BC for simpleSRFFoam kurne	March 3, 2011 06:14 by kurne	0	1,054
How use new case? FLOAT	March 3, 2011 05:32 by FLOAT	0	1,030
timeVarying and surfaceNormal values at the same time lfbarcelo	March 3, 2011 03:53 by bephi	1	1,998
Git for openFoam 1.6-ext? Peter_600	March 3, 2011 02:43 by Chris Lucas	4	2,732
limiter to control velocity ksv	March 2, 2011 18:55 by ksv	0	1,060
OpenFOAM-1.5-Dev kurne	March 2, 2011 17:56 by wouter	1	1,235
gradient at the border ginette	March 2, 2011 14:55 by ginette	0	1,243
Some injectors not injecting parcels usergk	March 2, 2011 13:11 by usergk	0	986
Boundary Layer Tripping deji	March 2, 2011 09:24 by deji	0	1,472

Read this first: How to ask a question on the forums

Page 177 of 239

177

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 09:15.