CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[OpenFOAM] strange triangles when slicing a plane.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 19, 2013, 14:22
Default strange triangles when slicing a plane.
  #1
New Member
 
Jonathan byrne
Join Date: Sep 2013
Posts: 17
Rep Power: 10
jonathanbyrn is on a distinguished road
I am trying to add a plane to my internal mesh and it seems to have inverted normals. Is this a problem with my graphics card or am I doing something wrong?

http://i.imgur.com/ofj44qy.png
jonathanbyrn is offline   Reply With Quote

Old   September 21, 2013, 14:57
Default
  #2
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,962
Blog Entries: 45
Rep Power: 125
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Greetings Jonathan,

I've seen this before... check the instructions on this thread: http://www.cfd-online.com/Forums/ope...-paraview.html - there is a solution in post #5

Best regards,
Bruno
__________________
wyldckat is offline   Reply With Quote

Old   September 23, 2013, 07:08
Default
  #3
New Member
 
Jonathan byrne
Join Date: Sep 2013
Posts: 17
Rep Power: 10
jonathanbyrn is on a distinguished road
Yep that sorted it, thanks again for your help wyldcat!

Last edited by jonathanbyrn; September 23, 2013 at 08:48.
jonathanbyrn is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Strange faded colour when look at 2-d plane contour yulu FLUENT 3 January 21, 2018 22:14
[snappyHexMesh] Strange SnappyHexMesh behavior at the symmetry plane ripperjack OpenFOAM Meshing & Mesh Conversion 6 March 3, 2017 14:39
[Gmsh] Problem with Gmsh nishant_hull OpenFOAM Meshing & Mesh Conversion 23 August 5, 2015 03:09
GMSH - Very strange effect - Mesh elements deleted when saving Araist Mesh Generation & Pre-Processing 3 July 15, 2015 07:03
[Gmsh] boundaries with gmshToFoam‏ ouafa OpenFOAM Meshing & Mesh Conversion 7 May 21, 2010 13:43


All times are GMT -4. The time now is 18:51.