[OpenFOAM] Some problems with paraview2.3.1 for a two-region (Multi-region) postprocessing

Asghari_M · April 14, 2015, 05:32

Hi all
I solved a solid heat conduction two-region problem by Openfoam2.3.1.
The results seem to be logical and corrrect as those are observed at log.heatconductionFoam file (an output text file).
However , whenever I want to observe the total region results in Paraview 2.3.1, I am facing with the following error:

Quote:

Warning: In /home/scientist/OpenFOAM/ThirdParty-2.3.1/ParaView-4.1.0/ParaViewCore/ServerManager/Rendering/vtkSMPVRepresentationProxy.cxx, line 279
vtkSMPVRepresentationProxy (0xb41c260): Could not determine array range.

The output file name of total domain post-processing is heatconduction.OpenFOAM.
Of course,if the results are shown separately ,there isn't any problem (for example at heatconduction{solid1}.OpenFOAM & heatconduction{solid2}.OpenFOAM files) and the results are correct.
However if the results are shown together in a paraview file containing of two solid regions, I encounter above error message.
Can anybody help me how to view the results of total domain in a file without any error?

Asghari_M · April 14, 2015, 09:50

Actually only I observe temperature fields for Time=0 for total domain and in the Volume Fields table in Paraview.
unfortunately, the temperature field data lost for next times for total domain in a file.
Thanks in advance for any help.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh interface for multi region	Mohammad Jam	OpenFOAM Meshing & Mesh Conversion	3	December 5, 2016 07:23
[snappyHexMesh] Convert stl files and multi region	abrunet	OpenFOAM Meshing & Mesh Conversion	1	July 1, 2014 10:15
Problems about multi swirl tubes simulation using	Jason	FLUENT	4	May 9, 2008 00:33
Problems in Turbo Postprocessing	Tobias	FLUENT	6	October 19, 2005 06:17
Win NT, pre and postprocessing with large problems	Dirk	FLUENT	1	February 7, 2001 14:50

April 14, 2015, 09:50		#2
Asghari_M Senior Member Mehdi Asghari Join Date: Feb 2010 Posts: 127 Rep Power: 15	Actually only I observe temperature fields for Time=0 for total domain and in the Volume Fields table in Paraview. unfortunately, the temperature field data lost for next times for total domain in a file. Thanks in advance for any help.