|
[Sponsors] |
[General] Change mesh for "Surface with edges" |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 22, 2015, 04:24 |
Change mesh for "Surface with edges"
|
#1 |
New Member
Jon Vegard Venås
Join Date: Apr 2014
Posts: 16
Rep Power: 12 |
I typically want to represent results illustrated in the figure below
As many elements in the figure to the left may be highly curved, I need to refine the mesh for plotting. The resulting mesh in paraview (using "Surface with edges") is then no longer of interest. How can I add the original mesh on top of the results in paraview? I tried to add an extra "piece", but I then struggled to be able to change the color of the mesh and be able to turn it off/on (as for "Surface with edges"). |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface | Kryo | OpenFOAM Meshing & Mesh Conversion | 13 | February 17, 2022 07:34 |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
How to use "translation" in solidBodyMotionFunction in OpenFOAM | rupesh_w | OpenFOAM Running, Solving & CFD | 5 | August 16, 2016 04:27 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
ICEM clustering of mesh points and multiple edges | webhaw | CFX | 4 | July 25, 2007 16:29 |