CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ParaView (https://www.cfd-online.com/Forums/paraview/)
-   -   [OpenFOAM] Paraview not working correctly (https://www.cfd-online.com/Forums/paraview/158521-paraview-not-working-correctly.html)

AlexKam August 27, 2015 08:38

Paraview not working correctly
 
Hi there,

I've been using Parafoam 3.1.2 on Ubuntu 12.04 with OpenFOAM 2.2.0 for a weeks now with no issues - however for some reason when I try opening a case I know get an error message popping up that says the following:
Code:

alexei@alexei-OptiPlex-9010:~/OpenFOAM/alexei-2.2.0/whirl_0.05r_0.01in_3.0w$ paraFoam
created temporary 'whirl_0.05r_0.01in_3.0w.OpenFOAM'
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action

Paraview still opens however there seems to be important variables missing from my results.
I had a similar issue a few weeks ago that somehow resolved itself - however I urgently need to check my results and am hoping someone could give an explanation and/or solution to the issue.

Kind Regards,
Alexei

wyldckat August 30, 2015 18:28

Quick answer: There seems to be a conflict with a new Qt version being installed in your system.
You can try using the internal reader:
Code:

paraFoam -builtin
More details: http://openfoamwiki.net/index.php/FA...er_in_ParaView


All times are GMT -4. The time now is 01:39.