CFD Online Logo CFD Online URL
Home > Forums > ParaView

DTC Hull paraFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 7, 2017, 07:41
Default DTC Hull paraFoam
Ron de Vos
Join Date: Jun 2015
Posts: 30
Rep Power: 4
Ron de Vos is on a distinguished road
dear people
i try again DTCHull I worked till now with wigley hull
but again I get this message when I open paraFoam

ERROR: In C:\ParaView-v5.0.0-source\VTK\IO\Geometry\vtkOpenFOAMReader.cxx, line 6508
vtkOpenFOAMReaderPrivate (0x8da5540): Error reading line 25 of C:\OpenFOAM\17.02\Admin-3.0.x\run\DTCHulltest\0/omega: Unsupported directive includeEtc

any idea how to avoid this error
Ron de Vos is offline   Reply With Quote

Old   March 30, 2017, 07:49
Default I got the same problem
New Member
Raffaele Frontera
Join Date: Mar 2017
Posts: 3
Rep Power: 2
Raffaele Frontera is on a distinguished road
Dear Ros,
I am busy with DTC Hull tutorial , I wanted change the surface, so i replaced in the turorials/resources/geometry/.. my own vessel. But at moment making partially scrpit of Allrun, to see how is going the mesh, I got the following error opening parafoam:

ERROR: In /home/openfoam/OpenFOAM/ParaView-5.0.1/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 6497

vtkOpenFOAMReaderPrivate (0xb602a70): Error reading line 25 of /home/raffaele/OpenFOAM/billo/tutorials/multiphase/interFoam/ras/goa/0/pointDisplacement: Unsupported directive includeEtc

Basically I got your same problem, did you fix your problem? If yes, please can you explain to me?

Thank you in advance,

Raffaele Frontera is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
DTC Hull tutorial Error cheljin1320 OpenFOAM Running, Solving & CFD 0 March 3, 2016 07:26
How to use paraFoam on a cluster andreas OpenFOAM Paraview & paraFoam 1 March 6, 2013 18:11
OpenFoam (Ubuntu): paraFoam via Xming+PuTTY raketenmaid OpenFOAM Paraview & paraFoam 4 February 5, 2013 06:20
Hydrostatic Pressure and Gravity miliante OpenFOAM Running, Solving & CFD 132 October 7, 2012 22:50
Free surface problem: hull mesh questions albertofast OpenFOAM 2 December 15, 2010 20:50

All times are GMT -4. The time now is 05:39.