CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[OpenFOAM] Parview: save screenshot in a specific size readable for Matlab

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 24, 2020, 03:43
Default Parview: save screenshot in a specific size readable for Matlab
  #1
Member
 
K
Join Date: Jul 2017
Posts: 97
Rep Power: 8
mkhm is on a distinguished road
Hi,

I want to compare my results of Matlab with the results of OpenFoam shown in Paraview. The question is the following: how can I save the results of Paraview in an appropriate size (only the geometry and not its background) and format readable for Matlab ? In that possible ? I want to make a subfigure comparing both. So, is there any command to tight axis for the results of paraview (only the geometry and not its background) ?

The very simple answer that comes to my mind is to make a screenshot of paraview results and resize the image to the size of its counterpart in Matlab. But how to resize and what format to consider for the screenshot to make it one of the subplot of a matlab figure is the big question.

All this is to compare the contour plot of numerical solutions (openfoam) with the analytical solution (Matlab). If your have any other alternatives than what is outlined above, they're welcome.

Thanks for your help,
Mary
mkhm is offline   Reply With Quote

Reply

Tags
contour plot, matlab, paraview

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting the height of the stream in the free channel kevinmccartin CFX 12 October 13, 2022 22:43
[Other] dynamicTopoFVMesh and pointDisplacement RandomUser OpenFOAM Meshing & Mesh Conversion 6 April 26, 2018 08:30
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
save data output at specific point using probe foam_noob OpenFOAM 0 March 11, 2010 03:13
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 14:08.