|
[Sponsors] |
[OpenFOAM] Trying to substract two pressure field from two different plans |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 25, 2023, 14:38 |
Trying to substract two pressure field from two different plans
|
#1 |
New Member
Join Date: Jan 2023
Posts: 3
Rep Power: 3 |
Hello,
I'm trying to substract via Paraview two plane of my OpenFoam simulation in order to have a Pressure coefficient ((Pext-Pint)/Pref). For that, I generated a plan which represent the external pressure of my façade, and a plan which represent the internal pressure of my façade. I use after that the PythonCalculator but as i do not have the exact same amount of cells in each plans, i have en error message. Does someone have an idea about how can i do some operations between these two plans even if they don't have the same amount of cells ? Would be very grateful, Thanks, Adak |
|
Tags |
calculation, field, paraview, plane, pressure |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another discussion on velocity-pressure coupling | toodles | Main CFD Forum | 16 | January 6, 2018 15:45 |
Varying Pressure Outlet with Field Function | t8fanning | STAR-CCM+ | 14 | November 1, 2017 11:39 |
static vs. total pressure | auf dem feld | FLUENT | 17 | February 26, 2016 14:04 |
Problem with rhoSimpleFoam | matteo_gautero | OpenFOAM Running, Solving & CFD | 0 | February 28, 2008 07:51 |
what the result is negatif pressure at inlet | chong chee nan | FLUENT | 0 | December 29, 2001 06:13 |