[lilvasco]

Hi! I'm trying to open this file on paraview through OpenFOAM and I'm getting this error. How can I solve it? I don't really know how to use it because our professor didn't explain it quite well...

micva@LAPTOP-VG7GLSBK:~/OpenFOAM/micva-6/run/dynastySym_seconda$ paraview sim.foam
ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 5425
vtkOpenFOAMReaderPrivate (0x55b9d9d8a3d0): Error opening /home/micva/OpenFOAM/micva-6/run/dynastySym_seconda/processor0/constant/polyMesh/faces.gz: Can't open. If you are trying to read a parallel decomposed case, set Case Type to Decomposed Case.

ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/Common/ExecutionModel/vtkExecutive.cxx, line 782
vtkCompositeDataPipeline (0x55b9d89fc0c0): Algorithm vtkOpenFOAMReader(0x55b9d9d88a40) returned failure for request: vtkInformation (0x55b9da8302c0)
Debug: Off
Modified Time: 228743
Reference Count: 1
Registered Events: (none)
Request: REQUEST_DATA
FROM_OUTPUT_PORT: 0
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0



ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 5425
vtkOpenFOAMReaderPrivate (0x55b9d9d4c660): Error opening /home/micva/OpenFOAM/micva-6/run/dynastySym_seconda/processor1/constant/polyMesh/faces.gz: Can't open. If you are trying to read a parallel decomposed case, set Case Type to Decomposed Case.

ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/Common/ExecutionModel/vtkExecutive.cxx, line 782
vtkCompositeDataPipeline (0x55b9d9c18270): Algorithm vtkOpenFOAMReader(0x55b9da703d40) returned failure for request: vtkInformation (0x55b9da8302c0)
Debug: Off
Modified Time: 325814
Reference Count: 1
Registered Events: (none)
Request: REQUEST_DATA
FROM_OUTPUT_PORT: 0
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0



ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 5425
vtkOpenFOAMReaderPrivate (0x55b9da8199a0): Error opening /home/micva/OpenFOAM/micva-6/run/dynastySym_seconda/processor2/constant/polyMesh/faces.gz: Can't open. If you are trying to read a parallel decomposed case, set Case Type to Decomposed Case.

ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/Common/ExecutionModel/vtkExecutive.cxx, line 782
vtkCompositeDataPipeline (0x55b9da740d40): Algorithm vtkOpenFOAMReader(0x55b9da701fd0) returned failure for request: vtkInformation (0x55b9da8302c0)
Debug: Off
Modified Time: 422355
Reference Count: 1
Registered Events: (none)
Request: REQUEST_DATA
FROM_OUTPUT_PORT: 0
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0



ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 5425
vtkOpenFOAMReaderPrivate (0x55b9da72d0e0): Error opening /home/micva/OpenFOAM/micva-6/run/dynastySym_seconda/processor3/constant/polyMesh/faces.gz: Can't open. If you are trying to read a parallel decomposed case, set Case Type to Decomposed Case.

ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/Common/ExecutionModel/vtkExecutive.cxx, line 782
vtkCompositeDataPipeline (0x55b9da7eadc0): Algorithm vtkOpenFOAMReader(0x55b9da845d60) returned failure for request: vtkInformation (0x55b9da8302c0)
Debug: Off
Modified Time: 518804
Reference Count: 1
Registered Events: (none)
Request: REQUEST_DATA
FROM_OUTPUT_PORT: 0
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0



ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 9582
vtkPOpenFOAMReader (0x55b9ff72cf40): Can't open /home/micva/OpenFOAM/micva-6/run/dynastySym_seconda/postProcessing/probes/fluid/constant/

ERROR: In /home/ubuntu/OpenFOAM/ThirdParty-dev/ParaView-5.6.0/VTK/Common/ExecutionModel/vtkExecutive.cxx, line 782
vtkPVCompositeDataPipeline (0x55b9dc1575f0): Algorithm vtkPOpenFOAMReader(0x55b9ff72cf40) returned failure for request: vtkInformation (0x55b9fe497770)
Debug: Off
Modified Time: 1631832
Reference Count: 1
Registered Events: (none)
Request: REQUEST_INFORMATION
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0