CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ParaView (https://www.cfd-online.com/Forums/paraview/)
-   -   [OpenFOAM] OF15 for Ubuntu804 buildParaView33cvs stoped suddenly (https://www.cfd-online.com/Forums/paraview/61062-of15-ubuntu804-buildparaview33cvs-stoped-suddenly.html)

yan September 30, 2008 00:31

OF15 for Ubuntu804 buildParaView33cvs stoped suddenly
 
i compile the paraview as what the Readme said, but the compilation stopped suddenly at 37%. the putout in terminal as follow:

.....

[ 37%] Building CXX object Utilities/VTKClientServer/Filtering/CMakeFiles/vtkFilteringCS.dir/vtkViewportCli entServer.o
[ 37%] Building CXX object Utilities/VTKClientServer/Filtering/CMakeFiles/vtkFilteringCS.dir/vtkVoxelClient Server.o
[ 37%] Building CXX object Utilities/VTKClientServer/Filtering/CMakeFiles/vtkFilteringCS.dir/vtkWedgeClient Server.o
[ 37%] Building CXX object Utilities/VTKClientServer/Filtering/CMakeFiles/vtkFilteringCS.dir/vtkFilteringCS Init.o
Linking CXX shared library ../../../bin/libvtkFilteringCS.so
[ 37%] Built target vtkFilteringCS
make: [all] error 2

i was a new learner, hope someone can tell me what's the problem? thanks in advance

alexm November 16, 2008 09:55

Hello, I have the same prob
 
Hello,

I have the same problem. Anyone here who solved it or has an idea?

Thanks in advance and Greetings, Axel

louisgag February 9, 2009 12:58

try running the build utility
 
try running the build utility with the -d option to get more details on the error

-Louis

hackit2me June 8, 2009 00:10

Possible solution ParaView and PV3FoamReader?
 
Hello All,

I was having the exact same issue as mentioned at the top of the thread.
I am running Ubuntu 9.04
QMake 4.3.5
CMake 2.4-patch 6
gcc 4.3.1

I did some digging by going into the actual ThirdParty/ParaView3.3-cvs/platforms/linuxGcc directory and directly running the make -d command as mentioned by another poster. This revealed the system was missing some sort of X11 strings header file "StringDefs.h" The point is, by issuing apt-get install xorg-dev, ALL of the problems compiling ParaView and PV3FoamReader were immediately solved.

I am not sure if this issue is explicitly documented somewhere, that this is a required dependancy of ParaView or OpenFoam? If so, I was not able to locate it.

Should this be added to some documentation for compiling ParaView?

Chris

ovie October 25, 2009 19:21

I am not quite sure if this would help. But there is a thread on the compilation of paraview on this link :
http://www.cfd-online.com/Forums/ope...-script-4.html

Maybe you can take a look and see if it helps.

Thanks.


All times are GMT -4. The time now is 19:10.