GRID

August 7, 2002, 11:10

Hi,

I am a Phoenics user I've got some problems with the grid. In my model fairly small inlets are present, the small inlets (0.008 in thicknes) are probably not working. This may be cause the are too small comparing to the grid or tolerance (0.085) of the grid. Is there a relation between the tolerance and the dimensions of the inlets??

Another problem: I would like to have the grid exactly fitting to the inlet borders. When I am in a object dialogue box of a certain inlet and set "object affects the grid" to YES, I do not see it back in the grid.

hopefully anybody can give me some suggestions,

Thanx, Marc.

August 7, 2002, 11:31

Please send me q1 file. I will check it and can suggest some thing. Pl. use SI units in your problem. Vikas

August 7, 2002, 13:17

You can try with tolerance 0.005 inch: Vikas

August 7, 2002, 11:10	GRID	#1
Marc Guest Posts: n/a	Hi, I am a Phoenics user I've got some problems with the grid. In my model fairly small inlets are present, the small inlets (0.008 in thicknes) are probably not working. This may be cause the are too small comparing to the grid or tolerance (0.085) of the grid. Is there a relation between the tolerance and the dimensions of the inlets?? Another problem: I would like to have the grid exactly fitting to the inlet borders. When I am in a object dialogue box of a certain inlet and set "object affects the grid" to YES, I do not see it back in the grid. hopefully anybody can give me some suggestions, Thanx, Marc.

August 7, 2002, 11:31	Re: GRID	#2
Vikas Kumar Guest Posts: n/a	Please send me q1 file. I will check it and can suggest some thing. Pl. use SI units in your problem. Vikas

August 7, 2002, 13:17	Re: GRID	#3
Vikas Kumar Guest Posts: n/a	You can try with tolerance 0.005 inch: Vikas

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
file reread-grid (reading new grid w/o wiping out	John McKelliget	FLUENT	4	January 11, 2007 03:32
to Identify unstructured grid and structrued grid	harry	Main CFD Forum	4	February 17, 2006 02:10
FOAM use a staggerd grid or collocated grid system	ztdep	OpenFOAM Running, Solving & CFD	0	September 15, 2005 11:53
coarse grid to fine grid crashing	Arnab	Siemens	1	February 22, 2005 12:27
GRID TO GRID INTERPOLATION in FLUENT	calogero	FLUENT	3	June 4, 2003 08:32