We have Phoenics version-3.2 I was working with body fitted cooardinating system, doing some tutorials, on this... first of all , when i open BFC-coordinate system, it give message warning - BFC cases should not be attempted in vr at present, but any how i have made the grid in BFC Grid menu. second big problem, domain is not changing according to grid , so i am unable to give inlet(object)outlet ,although vr is showing the grid, but grid(mesh) and domain is different... if any body can help me... thanks for reading , Regards.

At the following sites BFC tutorials are there, please do it sequentially as mentioned below.

http://www.cham.co.uk/phoenics/d_pol...htmBody-Fitted Co-ordinates

BFC 1 - Points and Lines BFC 2 - Making Frames BFC 3 - Frame matching BFC 4 - Copy/Transfer BFC 5 - Boundary Conditions BFC 6 - A Simple Case

Thanks for response(so fast).. But there is still same problem..here are steps.. -I did four tutorials step by step up to BFC-4, -at end of BFC-4, i was in BFC-menu, then i click ok, -it gave three options Continue, Plot, End, -I clicked End(which is necessary to return to main menu(geometry)) -still it is not showing the domain, coincided with geometry

due to this i am unable to give boundary conditions in next tut(BFC-5).. what should i do now ...

Please send me Q1 file for BFC Tut-4, in which you are facing problem and also specify me the step.

will u please tell me how to save Q1, and how to send it, i open Edit menu, it has Q1, i click , it shows 134 lines,5041 character, how to get this file , i dont know, help me for this.. steps i told u in my last message, one thing more we have 3.2-v, not 3.5... i also perform the whole tuts, as directed in Satellite(tuts), but same problem, Thanks

sir, do you want me to send complete step by step detail, how i perform the tuts, i can also send that, should i...

update your foftware to phoenics 3.5