CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Phoenics (https://www.cfd-online.com/Forums/phoenics/)
-   -   Small problem with VR editor (https://www.cfd-online.com/Forums/phoenics/51589-small-problem-vr-editor.html)

Song April 22, 2003 18:28

Small problem with VR editor
 
Hi,

I just noticed some small problem with VR editor when using low-resolution screen setting. The setting for wall function and global roughness under "Sources" panel is missing when I use low resolution setting such as 1024x768. The problem was solved when I switched the screen setting to 1280x1024. Post this message in case somebody else has the same problem.

Song

Song April 22, 2003 18:34

Re: Small problem with VR editor
 
Sorry for this confusing message. I found out that I made a mistake right after I sent out this message. Under low screen resolution setting, the setting for wall function and global roughness can still be displayed by clicking "page Dn" at the bottom of that panel. Probably because we are not so used to this kind of button, we normally ignore it. Sorry again for the confusion.

Song


All times are GMT -4. The time now is 12:10.