CFD Online Logo CFD Online URL
Home > Forums > Phoenics

About gas generates

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 22, 2005, 22:47
Default About gas generates
Posts: n/a
Is this right to set the gas generating rate to 2.402400E-07(kg/m**3.S) and need no other setting? It is in a packed vessel.

PATCH (SOR ,VOLUME,3,0,0,0,0,0,1,1) COVAL (SOR ,P1 , FIXFLU , 2.402400E-07)
  Reply With Quote

Old   June 23, 2005, 11:46
Default Re: About gas generates
Posts: n/a
This will set a mass influx of 2.402400E-07 * Volume of the vessel.

Either change the patch type to CELL (which =1) or change the rate to 2.402400E-07/(VOLUME)

In The RESULT file under Nett sources you should see the mass flux which is entering the domain...Nett source for P1, in kg/s.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh generates 8823 patches cricke OpenFOAM Mesh Utilities 4 November 14, 2008 17:28
FoamToVTK surfaceFields generates invalid files for 2D case 7islands OpenFOAM Bugs 3 September 2, 2008 09:04

All times are GMT -4. The time now is 10:26.