CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Phoenics

contaminant concentration in inlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 18, 2006, 12:36
Default contaminant concentration in inlet
  #1
Juan
Guest
 
Posts: n/a
In my case, the inlet is not very far from the outlet. Therefore, some contaminant comes into domain through inlet again. I simulate the concentration of outlet for each time step, how could I add this value for each time step to inlet? Thank you very much for any suggestions.
  Reply With Quote

Old   February 10, 2006, 14:41
Default Re: contaminant concentration in inlet
  #2
Mick
Guest
 
Posts: n/a
1/ Store the values at each time step into a spare variable 2/ Set these stored values as those entering the domain through the inlet.

Note ground coding required for this, but it is not too difficult to do.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Contaminant Concentration Alex FLUENT 3 November 18, 2014 14:15
Inlet Concentration Profiles Johann CFX 2 November 18, 2008 03:04
units for inlet values of contaminant in star-ccm+ judge Siemens 0 August 13, 2008 08:29
HOW TO PUT CONTAMINANT CONCENTRATION?????????? naus FLUENT 3 April 21, 2006 07:04
Units for Contaminant Concentration Rob Phoenics 1 March 30, 2005 11:06


All times are GMT -4. The time now is 14:37.