CFD Online Logo CFD Online URL
Home > Forums > Phoenics

Temperature build in Combustion model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 28, 2006, 06:30
Default Temperature build in Combustion model
Anjani Kr. dubey
Posts: n/a
hi all!

pl tell me how to get the intermediate temperature(tmp1) values in case of 3 gases mixing(combustion model)with trasience .

The problem is that in case of 3 gases mixing Energy equation is total enthalpy,then how to activate solution for tmp1,when i tried to activate it from SOLUTION CONTROL extra variables, there is a run time error as abs temp less than 0(zero).Also the point history probe object is not having tem1 as an option for showing the temp Vs. time graph. pl suggest

thanks in advance

regards Anjani
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Combustion temperature yu_korogi OpenFOAM Running, Solving & CFD 1 May 6, 2008 04:00
help to build an atomization model Please Mido FLUENT 1 March 1, 2008 09:39
High Combustion Temperature in the EBU model Mehdi Siemens 0 April 24, 2006 05:53
Shell Model for Low Temperature Combustion Phil Main CFD Forum 0 March 17, 2006 01:34
Decreasing temperature of combustion Jacek FLUENT 5 February 18, 2002 01:45

All times are GMT -4. The time now is 15:25.