regarding grid
i am working on single phase natural circulation loop. i want to make grid in bfc for circular pipe which is a rectangular loop. i want to close the loop how 2 close the loop. i am getting one error msg ,yc has revesed sign because grid supllid was left handed
|
Re: regarding grid
RE left-handed grid, you've put you ijk origin in the wrong place. Shift it over to the other side of the mesh. If you're using a polar mesh, just rotate the circular plane around the other way.
To close the loop, you need to define some cyclic boundary conditions at the extents where the loop closes. |
Re: regarding grid
To close the loop, which type of cyclic boundary conditions shoud i specify at the extents where the loop closes.
|
Re: regarding convergence
i am working on single phase natural circulation loop. i have make grid in bfc for circular pipe which is a rectangular glass loop. the loop is filled with water. heater is placed at bottom & cooler is at top. i want to solve for velocites,press& temp.how to solve for this. how to get convergence
|
Re: regarding convergence
i am also working on the same modeling. you have already started some months ago, you might have proceeded a long way , please share with me. with regards Narendar
|
All times are GMT -4. The time now is 22:41. |