|
[Sponsors] |
February 9, 2007, 05:22 |
tecplot translator problem
|
#1 |
Guest
Posts: n/a
|
Hi,
I have a trouble translating a phi file to a tecplot file. Curiously, the same tecexe (built by me) works well with another (flame) case. I get the next message: Main data file type : 0 - PHI 1 - PHIDA 3 - Grid only 0 Enter file name - RETURN for default: phi phi2 TITLE = FLAME2 20 NX = 16 NY = 72 NZ = 326 Opening PATGEO file Enter PATGEO file name - RETURN for default: patgeo / for none / Reading PATGEO file Number of blocks found = 1 Reading the coordinates Reading the PRPS numbers Reading scalars Reading velocities Starting TECPLOT file startio: error in format apparent state: unit 16 named tecplt.dat last format: (**(2H,",A4,1H")) lately writing sequential formatted external IO Aborted I do not access to the main translator subroutine, i.e. CALL TECMAIN(PDA,XDA,STORE,NOBLK,BFC,CARTES,ONEPHS,COMM , 1 CCC1,CCC2,CRT1,CRT2,BLANK,PRP,ANS,NAME,TITLE,TECNA M,FORM, 2 PHINAM,XYZNAM,PATNAM,NAM,VEL,IJKBLK,NMAP,IWORK,LIN K,WORK, 3 COORD,XFRAC,PHI,PRPS,VEL1,VEL2,MAXVAR,MAXNOD,MAXEL E,MAXLNK, 4 MAXBLK,SHT,OPN,LUPHI,LUPDA,LUXYZ,LUPAT,LUERR,LUTEC ,LENREC,NBYT) Any solution??? |
|
February 9, 2007, 09:06 |
Re: tecplot translator problem
|
#2 |
Guest
Posts: n/a
|
Normaly,
The translator generates a file named tecplt.dat and it's easy to read it with tecplot. If any problem, contact me by Email. A+ |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tecplot problem | nzy102 | OpenFOAM Post-Processing | 1 | April 16, 2008 05:26 |
A tecplot problem | scubme | FLUENT | 2 | November 22, 2004 04:43 |
Problem with Tecplot 9.2 !!! | Boris | FLUENT | 0 | March 6, 2003 22:08 |
CAD data translator | sylvain | Main CFD Forum | 2 | February 1, 2001 10:29 |
cfd to fem translator | tee | Main CFD Forum | 0 | January 17, 1999 22:37 |