CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Phoenics

Use of INFORM for properties

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   March 1, 2007, 04:24
Default Use of INFORM for properties
Posts: n/a

I have worked with inform in phoenics . the inform for sources works well. but the inform for properties is not working. I tried to put PWLF, PWL3 etc functions but these wont work.

e.g. It I set rho = 1000 in properties panel and if I set rho = 2000 in inform, then it does calculations with rho = 1000 but in the display it shows rho = 2000 (i.e. if i plot contours of density, it shows rho=2000 everywhere.) (Typical inform statements are like

(property rho1 is 2000) (proper rho1 is pwlf(/phoenics/d_priv1/rhodata, TEM1)) ) etc.

Whether any other modification is needed in using inform for properties.

Can some one help me please.

  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
INFORM to change FALSDT? patti Phoenics 0 December 1, 2007 18:45
inform calculation jim Phoenics 0 March 23, 2007 04:21
user variable inform Marcelo "Bovy" Abarca Phoenics 1 January 10, 2007 05:27
Inform to get pressure coefficients irish-user Phoenics 1 November 17, 2004 21:37
gas properties Riccardo Siemens 1 July 6, 2004 14:56

All times are GMT -4. The time now is 16:08.