CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Phoenics

Extracting results in FLAIR

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   April 18, 2007, 08:31
Default Extracting results in FLAIR
Posts: n/a
I'm using the Pheonics FLAIR model to model the wind velocity at pedestrian level within street canyon. I've imported all the buildings using .stl file with true grid coordinates. After completing the model run, I would like to get the wind velocities at more than 50 points. I've the true coordinates of the 50 points. Currently I'm moving the probe by enter the true coordinates of the 50 points one by one in the screen to get the wind velocity value at the probe location. This works but it takes a lot of time and there may be humna error in entering the coordinates. Does anyone know if we can write a simple programme to get this done? I saw some programming code that can work with grid coordinates but not true coodinates.

Thanks in advance for those who can give some thought on this.

  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
FLAIR package Sileno Phoenics 6 September 6, 2005 19:28
outlet object in FLAIR Sileno Phoenics 3 November 27, 2004 08:21
flair method mohammadi Main CFD Forum 0 April 15, 2002 09:18
some questions about FLAIR J.S.DU Phoenics 0 October 19, 2001 02:07
FLAIR Software Tammy Richardson Phoenics 2 July 16, 2001 08:54

All times are GMT -4. The time now is 16:15.