CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Phoenics

Print results and set boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   September 22, 2007, 00:42
Default Print results and set boundary condition
Kenneth Lam
Posts: n/a
We stimulate Air Ventilation Assessment (AVA), micro-climate around buildings, neutral ventilation and thermal comfort within buildings by FLAIR.

Question 1: Apart form visal presentation of the results by FLAIR-Viewer or extracting a spot result at monitoring probe, we could not generate a result table (text form) summarizing all the results (e.g. PMV, air velocity, etc) within a concerned area or a plane. It would be important for us to summarize these results in a report. How can we make this?

Question 2: We need to set the simulated air velocity around the building as boundary condition to further simulate the air flow path and magnitude into and inside a building (neutral ventilation). How can we make this?

  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Using results form previous run as inlet condition lauren CFX 3 June 9, 2008 13:32
Slip boundary condition giving strange results hemph OpenFOAM Running, Solving & CFD 3 January 18, 2007 05:15
Boundary condition of the third kind or Danckwertz boundary condition plage OpenFOAM Running, Solving & CFD 4 October 3, 2006 12:21
Using results form previous run as inlet condition M CFX 2 January 16, 2006 22:43
how to print the results from CFX-4.2 cfd_99 Main CFD Forum 5 June 21, 1999 09:23

All times are GMT -4. The time now is 12:14.