CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Phoenics (https://www.cfd-online.com/Forums/phoenics/)
-   -   Re: CO emmission Modelling for car park (https://www.cfd-online.com/Forums/phoenics/52258-re-co-emmission-modelling-car-park.html)

 Assem El Hajj May 1, 2008 02:37

Re: CO emmission Modelling for car park

would like to have a spreadsheet or software for car park co calculations

 Pietreanu Costel January 13, 2009 05:57

Re: CO emmission Modelling for car park

I would like to have a book and software for car park CO and smoke calculations. Best regards!

 Papillon January 6, 2010 11:35

CAR Park

Dear
I found your question about car park simulation
Your question is since the last january ,i hope that you get answers to your problem, can you help me how to simulate car park simulation.
Best

 quezacolatus January 7, 2010 00:40

So have you guys tried using PHOENICS to run your sim?
It's actually easy using this software to calculate emissions expecially since you can actually import your own CAD.

 Papillon January 7, 2010 02:29

Thank you for your reply i am using fluent,
I can create my CAD Geometry with Gambit, The problem is The source of smoke,
Mass fractions of the smoke, clearance and others variable to do a full simulation,
any advices is welcom
__________________
Papillon

 quezacolatus January 7, 2010 02:30

Sorry, I can't help you there. I'm in combustion myself, so not a lot related. But best of luck, probably the guys around here know something.

 Papillon January 7, 2010 02:33

Thank you for your help is very kind from you , i am waiting for others replys :)
Good luck
Best

 ilyas_mufeen03 February 8, 2013 02:16

CO doubt

Quote:
 Originally Posted by Papillon (Post 241722) Thank you for your reply i am using fluent, I can create my CAD Geometry with Gambit, The problem is The source of smoke, Mass fractions of the smoke, clearance and others variable to do a full simulation, any advices is welcom __________________ Papillon
Hi,

I am doing Car park CO analysis in Phoenics.

But I am injecting CO source through inlet object.

Cant we solve as like we do in FLuent ?