Making of 4 quadrant of windcatcher.

dezine_gen · August 20, 2010, 11:51

Dear All,
I need help in making a model of 'windcatcher' in Phoenics 2009.
Those who are not aware of what 'windcatcher' is, please see the attached image. A windcatcher has 4 quadrant winthin its square shape and air flows in and out each quadrant independent of each other.

My problem is when I'm trying to model it in Phoenics 2009, I'm experiencing that I can't rotate any plate object in the program. I've tried with the 'shapemaker' and still unable to do that.

I've imported .stl, .dxf and .3ds files and they appeared, but the air flows through from one to another, with those imported geometry (even though I assigned them as blockage material means the four quadrant is not working, they are behaving like one box.) I want the air that 'flows in' should not mix with what is 'flowing out'. You can see in the attached image that air is mixing from one quadrant to another, which I dont want.

Can anyone help me about how I can make a shape as in the image attached here? Many thanks in advance for your help.

h**p://img696.imageshack.us/i/windcatchersall.jpg/

Linh.Hoang · September 3, 2010, 01:38

Dear Tanvir,
maybe the cells are not blocked. sometimes when you import a stl an it has very thin walls you have to minimize your cells too. Make your Model tranparent and turn on geometry cells then you can see if phoenics recignize your model.

Linh

mukut · September 24, 2010, 22:37

1. Is PHOENICS installed in your working PC or using via server? If you are using PHOENICS from university server like me, please check the copying method during transfer from your pc's HDD to your working directory. Last time I have fetched a problem that the 3D shape (stl file) of a car body become 2D when I imported to PHOENICS.

August 20, 2010, 11:51	Making of 4 quadrant of windcatcher.	#1
dezine_gen New Member Tanvir Morshed Join Date: Jan 2010 Posts: 3 Rep Power: 16	Dear All, I need help in making a model of 'windcatcher' in Phoenics 2009. Those who are not aware of what 'windcatcher' is, please see the attached image. A windcatcher has 4 quadrant winthin its square shape and air flows in and out each quadrant independent of each other. My problem is when I'm trying to model it in Phoenics 2009, I'm experiencing that I can't rotate any plate object in the program. I've tried with the 'shapemaker' and still unable to do that. I've imported .stl, .dxf and .3ds files and they appeared, but the air flows through from one to another, with those imported geometry (even though I assigned them as blockage material means the four quadrant is not working, they are behaving like one box.) I want the air that 'flows in' should not mix with what is 'flowing out'. You can see in the attached image that air is mixing from one quadrant to another, which I dont want. Can anyone help me about how I can make a shape as in the image attached here? Many thanks in advance for your help. h**p://img696.imageshack.us/i/windcatchersall.jpg/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM on MinGW crosscompiler hosted on Linux	allenzhao	OpenFOAM Installation	127	January 30, 2009 19:08
DxFoam reader update	hjasak	OpenFOAM Post-Processing	69	April 24, 2008 01:24
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug	unoder	OpenFOAM Installation	11	January 30, 2008 20:30
HELPInstallation on RedHat90	booosix	OpenFOAM Installation	8	July 17, 2007 06:40
DecomposePar links against liblamso0 with OpenMPI	jens_klostermann	OpenFOAM Bugs	11	June 28, 2007 17:51

September 3, 2010, 01:38		#2
Linh.Hoang New Member Join Date: May 2009 Location: Germany Posts: 25 Rep Power: 16	Dear Tanvir, maybe the cells are not blocked. sometimes when you import a stl an it has very thin walls you have to minimize your cells too. Make your Model tranparent and turn on geometry cells then you can see if phoenics recignize your model. Linh

September 24, 2010, 22:37		#3
mukut Senior Member Mominul MuKuT Join Date: Mar 2009 Location: Bangladesh Posts: 124 Rep Power: 17	1. Is PHOENICS installed in your working PC or using via server? If you are using PHOENICS from university server like me, please check the copying method during transfer from your pc's HDD to your working directory. Last time I have fetched a problem that the 3D shape (stl file) of a car body become 2D when I imported to PHOENICS.