[Pointwise] unstructured mesh domain – question

James_ · November 8, 2012, 13:52

Hi,

I’ve problem with creation of unstructured mesh (picture 1, 1a). In this case the domain is flat. This domain is a part of cylinder and it should looks like a domain in picture 2, 2a, (structural mesh). Each curve connector has 20 “connections” and straight connector is divided on 176 points (I’ve used dimension option).
What should I do to create an unstructured domain on a cylindrical part?
Thank you in advance for your help.

Best regards
James

cnsidero · November 8, 2012, 19:22

James_ you will need to create a cylindrical database surface first, then create the unstructured domain on that surface so it takes the shape you desire.

-Chris

James_ · November 9, 2012, 04:48

Thank you very much Chris

I am still not oriented well in Pointwise software and that is the reason of my basic problems

thanks for your help

Panboy · June 5, 2013, 14:58

You will want to do a projection onto your database

Naruto · June 6, 2013, 06:13

How could I create a curvy database? Could I do it inside pointwise or do I need to use CAD utilities and than transfer it into pointwise?

Panboy · June 6, 2013, 09:19

You can do it inside pointwise. You can create databases using the create-sweep or create-revolve features.

LamiaOF2.1 · April 19, 2015, 09:00

hello everyone
I dont know how to mesh this geometry
please help
it's a block into windy domain
can any one contact me and give me hlep

dgarlisch · April 21, 2015, 10:43

LamiaOF2.1,

Please create a new thread for this question using the New Thread button at the bottom of http://www.cfd-online.com/Forums/pointwise/

Also, you need to add more details. It will be difficult to answer your question as it is currently written. See the STICKY POST at the top of http://www.cfd-online.com/Forums/pointwise/ for information.

June 6, 2013, 06:13		#5
Naruto Member Join Date: Nov 2012 Posts: 62 Rep Power: 13	How could I create a curvy database? Could I do it inside pointwise or do I need to use CAD utilities and than transfer it into pointwise? __________________ Happy Foaming

April 19, 2015, 09:00	help	#7
LamiaOF2.1 New Member Lamia Join Date: Feb 2013 Posts: 18 Rep Power: 13	hello everyone I dont know how to mesh this geometry please help it's a block into windy domain can any one contact me and give me hlep

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] How can I create prism mesh for a 3D domain surrounded by a torus?	lzgwhy	ANSYS Meshing & Geometry	5	May 18, 2017 17:10
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 09:03
[ICEM] Extruded unstructured mesh association with boundaries, volumes, etc.	macfly	ANSYS Meshing & Geometry	6	August 7, 2012 16:13
Unstructured Mesh ICEM on a cube	jerome_	ANSYS	0	May 30, 2012 05:34
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 10:09

November 8, 2012, 19:22		#2
cnsidero Senior Member Chris Sideroff Join Date: Mar 2009 Location: Ottawa, ON, CAN Posts: 434 Rep Power: 22	James_ you will need to create a cylindrical database surface first, then create the unstructured domain on that surface so it takes the shape you desire. -Chris

November 9, 2012, 04:48		#3
James_ New Member James Join Date: Oct 2012 Posts: 18 Rep Power: 13	Thank you very much Chris I am still not oriented well in Pointwise software and that is the reason of my basic problems thanks for your help

June 5, 2013, 14:58		#4
Panboy Member Daniel Oliden Join Date: May 2012 Location: Arizona Posts: 36 Rep Power: 13	You will want to do a projection onto your database

June 6, 2013, 09:19		#6
Panboy Member Daniel Oliden Join Date: May 2012 Location: Arizona Posts: 36 Rep Power: 13	You can do it inside pointwise. You can create databases using the create-sweep or create-revolve features.

April 21, 2015, 10:43		#8
dgarlisch Senior Member David Garlisch Join Date: Jan 2013 Location: Fidelity Pointwise, Cadence Design Systems (Fort Worth, Texas Office) Posts: 307 Rep Power: 14	LamiaOF2.1, Please create a new thread for this question using the New Thread button at the bottom of http://www.cfd-online.com/Forums/pointwise/ Also, you need to add more details. It will be difficult to answer your question as it is currently written. See the STICKY POST at the top of http://www.cfd-online.com/Forums/pointwise/ for information.