CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Pointwise & Gridgen (https://www.cfd-online.com/Forums/pointwise/)
-   -   Hybrid mesh question (https://www.cfd-online.com/Forums/pointwise/111476-hybrid-mesh-question.html)

 j_h_86 January 8, 2013 07:06

Hybrid mesh question

I want to create a hybrid mesh.

Is it possible in Gridgen to have a linear change of the distance of the first gridline to the wall along one coordinate axis?

I want to consider a strong acceleration of the external flow along the axis and therefore the diminution of the boundary layer. Hence the distance of the first griline to the wall should get also smaller.

Any ideas?

Best regards and thank you very much!

 jchawner January 11, 2013 10:02

Johannes:

The answer is "it depends." It depends on which method you're using to generate the mesh and how rigidly you want to enforce the linear decrease in cell size.

For example, if you are generating a structured grid near the wall all you have to do is change the spacing constraint on the vertical edges on either end of the wall to the desired values and the interior spacings will be a linear interpolation between them. This holds true even if you smooth the grid using the elliptic PDE solver.

That's just one example. Because there are so many other options it's probably best if you contacted our tech support engineers directly at support@pointwise.com.

 j_h_86 January 11, 2013 10:52

Quote:
 Originally Posted by jchawner (Post 401375) Johannes: The answer is "it depends." It depends on which method you're using to generate the mesh and how rigidly you want to enforce the linear decrease in cell size. For example, if you are generating a structured grid near the wall all you have to do is change the spacing constraint on the vertical edges on either end of the wall to the desired values and the interior spacings will be a linear interpolation between them. This holds true even if you smooth the grid using the elliptic PDE solver. That's just one example. Because there are so many other options it's probably best if you contacted our tech support engineers directly at support@pointwise.com.
Thank you for your reply. I will try my best to implement your idea and I will give you some feedback next monday.

Have a nice weekend!

 All times are GMT -4. The time now is 05:56.